Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRefrigerator Dispenser Water Line Spring (part 807688301) - Frigidaire Refrigerator Repair Help
Refrigerator Dispenser Water Line Spring (part 807688301) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$15.05Estimated Savings
$112.5002:10
- Description
This video provides step-by-step repair instructions for replacing the refrigerator dispenser water line spring on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator dispenser water line spring replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: 7/16th inch wrench.
All of the information for this refrigerator dispenser water line spring replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: 7/16th inch wrench.
Step By Step Instructions
1
Before you replace the dispenser water line spring in your refrigerator…
2
…be sure to unplug the power cord.
3
Detach the lower grille…
4
…and use a 7/16th inch wrench to depress the retaining ring to release the dispenser water line from the coupler.
5
Cut the tape and you can slide the old spring off of the water line.
6
Install the new dispenser water line spring…
7
…by sliding it over the line and push it up into the freezer door.
8
Position the spring approximately two inches from the end of the line…then use tape to secure the spring.
9
Reinsert the end of the water line into the coupler until fully seated.
10
Realign the grille and snap it into place.
11
Plug the power cord back in…
12
…and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the refrigerator dispenser water line spring on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator dispenser water line spring replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: 7/16th inch wrench.
All of the information for this refrigerator dispenser water line spring replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: 7/16th inch wrench.
Step-By-Step Instructions
1
Before you replace the dispenser water line spring in your refrigerator…
2
…be sure to unplug the power cord.
3
Detach the lower grille…
4
…and use a 7/16th inch wrench to depress the retaining ring to release the dispenser water line from the coupler.
5
Cut the tape and you can slide the old spring off of the water line.
6
Install the new dispenser water line spring…
7
…by sliding it over the line and push it up into the freezer door.
8
Position the spring approximately two inches from the end of the line…then use tape to secure the spring.
9
Reinsert the end of the water line into the coupler until fully seated.
10
Realign the grille and snap it into place.
11
Plug the power cord back in…
12
…and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Spring
$15.05
Total$0.00
Related Articles & Videos
02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help
03:28
Part Replacement
Freezer Light Socket (part 241559801) - Frigidaire Refrigerator Repair Help