Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFreezer Light Socket (part 241559801) - Frigidaire Refrigerator Repair Help
Freezer Light Socket (part 241559801) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$58.93Estimated Savings
$112.5003:28
- Description
This video provides step-by-step repair instructions for replacing the refrigerator freezer light socket on a Frigidaire refrigerator (Model FFSS2315TS0). The most common reason for replacing the light socket is when the light is not working
All of the information for this refrigerator freezer light socket replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, & a flat-head screwdriver.
All of the information for this refrigerator freezer light socket replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, & a flat-head screwdriver.
Step By Step Instructions
1
Frigidaire Refrigerator - Model FFSS2315TS0
2
Refrigerator Freezer Light Socket Replacement
3
Tools Needed
4
You will need a quarter-inch socket or nut driver and a flat-head screwdriver for this procedure.
5
Shock
6
Be sure to unplug the power cord.
7
Lift the ice bucket assembly up in the front then pull straight out.
8
Use a quarter-inch socket or nut driver to loosen the two icemaker mounting screws.
9
Lift the icemaker off of the screws and disconnect the wire connecter.
10
Unthread the lower screws securing the ice auger drive motor assembly.
11
Depress the tab to disconnect the wire harness.
12
Heavy
13
You can now lift the assembly up and out.
14
Unthread the light bulb from the socket.
15
Sharp
16
Use a flat-head screwdriver to depress the retaining tab to detach the old light socket.
17
Note the orientation of the wires, then disconnect them to fully release the old socket.
18
Install the new light socket by first connecting the wires to the appropriate terminals.
19
Snap the socket into place in the housing.
20
Fragile
21
Thread the light bulb into the new socket ? be careful not to overtighten.
22
Reinstall the ice auger drive motor assembly by hooking the tabs into the slots in the support rails.
23
Thread the two lower screws.
24
Connect the wire harness.
25
Reinstall the icemaker by first connecting the wire connecter.
26
Align the icemaker on the fill tube and the mounting screws then tighten the screws.
27
Reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back.
28
Plug the power cord back in.
29
Congrats! Your refrigerator is now ready for use.
Description
This video provides step-by-step repair instructions for replacing the refrigerator freezer light socket on a Frigidaire refrigerator (Model FFSS2315TS0). The most common reason for replacing the light socket is when the light is not working
All of the information for this refrigerator freezer light socket replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, & a flat-head screwdriver.
All of the information for this refrigerator freezer light socket replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: A quarter-inch socket or nut driver, & a flat-head screwdriver.
Step-By-Step Instructions
1
Frigidaire Refrigerator - Model FFSS2315TS0
2
Refrigerator Freezer Light Socket Replacement
3
Tools Needed
4
You will need a quarter-inch socket or nut driver and a flat-head screwdriver for this procedure.
5
Shock
6
Be sure to unplug the power cord.
7
Lift the ice bucket assembly up in the front then pull straight out.
8
Use a quarter-inch socket or nut driver to loosen the two icemaker mounting screws.
9
Lift the icemaker off of the screws and disconnect the wire connecter.
10
Unthread the lower screws securing the ice auger drive motor assembly.
11
Depress the tab to disconnect the wire harness.
12
Heavy
13
You can now lift the assembly up and out.
14
Unthread the light bulb from the socket.
15
Sharp
16
Use a flat-head screwdriver to depress the retaining tab to detach the old light socket.
17
Note the orientation of the wires, then disconnect them to fully release the old socket.
18
Install the new light socket by first connecting the wires to the appropriate terminals.
19
Snap the socket into place in the housing.
20
Fragile
21
Thread the light bulb into the new socket ? be careful not to overtighten.
22
Reinstall the ice auger drive motor assembly by hooking the tabs into the slots in the support rails.
23
Thread the two lower screws.
24
Connect the wire harness.
25
Reinstall the icemaker by first connecting the wire connecter.
26
Align the icemaker on the fill tube and the mounting screws then tighten the screws.
27
Reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back.
28
Plug the power cord back in.
29
Congrats! Your refrigerator is now ready for use.
Applicable Product Model
Related Articles & Videos
02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help