Video & Articles: Appliance & Equipment RepairIcemaker (part 241798231) - Frigidaire Refrigerator Repair Help

Icemaker (part 241798231) - Frigidaire Refrigerator Repair Help

01:40
This video provides step-by-step repair instructions for replacing the refrigerator ice maker on a Frigidaire refrigerator (Model FFSS2315TS0). The most common reason for replacing the ice maker is if the refrigerator ice dispenser is not working.

All of the information for this refrigerator ice maker replacement video is applicable to the following brands:
Frigidaire, Kenmore, Electrolux, Westinghouse, Tappan, Crosley, Kelvinator, Gibson, Universal.

Tools used: Quarter-inch socket or nut driver.

Step By Step Instructions

1
Before you replace the ice maker in your refrigerator, be sure to unplug the power cord.
2
Lift the ice bucket assembly up in the front, then pull straight out.
3
Use a quarter inch socket or nut driver to loosen the two ice maker mounting screws.
4
Lift the icemaker off of the screws and disconnect the wire connector.
5
Install the new ice maker by first connecting the wire connector.
6
Align the ice maker on the fill tube and the mounting screws, then tighten the screws.
7
Reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back.
8
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the refrigerator ice maker on a Frigidaire refrigerator (Model FFSS2315TS0). The most common reason for replacing the ice maker is if the refrigerator ice dispenser is not working.

All of the information for this refrigerator ice maker replacement video is applicable to the following brands:
Frigidaire, Kenmore, Electrolux, Westinghouse, Tappan, Crosley, Kelvinator, Gibson, Universal.

Tools used: Quarter-inch socket or nut driver.
Step-By-Step Instructions
1
Before you replace the ice maker in your refrigerator, be sure to unplug the power cord.
2
Lift the ice bucket assembly up in the front, then pull straight out.
3
Use a quarter inch socket or nut driver to loosen the two ice maker mounting screws.
4
Lift the icemaker off of the screws and disconnect the wire connector.
5
Install the new ice maker by first connecting the wire connector.
6
Align the ice maker on the fill tube and the mounting screws, then tighten the screws.
7
Reinstall the ice bucket assembly by positioning it on the rails and sliding it straight back.
8
Plug the power cord back in and your refrigerator should be ready for use.

Applicable Product Model

Refrigerator
Brand
Product Type
Model
Subtype
Cooling System
Icemaking System
Dispensing System
Product Diagram & Manuals
Parts Needed
Recommended Tools and Accessories
Total$0.00

Related Articles & Videos

02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help
03:28
Part Replacement
Freezer Light Socket (part 241559801) - Frigidaire Refrigerator Repair Help
04:17
Part Replacement
Water Inlet Valve (242252702) - Frigidaire Refrigerator Repair Help