Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Line Fuse Replacement #W11188752 
Kitchenaid Microwave Line Fuse Replacement #W11188752
Skill Level
Total Parts Cost
$10.09Estimated Savings
$112.5003:10
- Description
This video provides step-by-step repair instructions for replacing the line fuse on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the line fuse is if the microwave will not work at all.
All of the information for this microwave fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Line Fuse Replacement
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
Step 1: You will need a Phillips-head screwdriver or a quarter-inch nut driver and an assistant to help move heavy microwave.
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and remove any racks from the oven along with the turntable and support.
7
Step 4: Now use a Phillips-head screwdriver to unthread the two screws securing the mounting flanges to the cabinet.
8
Step 5: Remove the washers as well if still intact.
9
Step 6: Now have an assistant to help you pull the appliance out of the cabinet and set it on a sturdy surface.
10
Step 7: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
11
Step 8: Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread the four screws securing the top access panel.
12
Step 9: Lift the panel up then slide forward to remove.
13
Step 10: Pull the old fuse out of the holder.
14
Step 11: Install the new line fuse by inserting it into the holder.
15
Step 12: Replace the top access panel by inserting the rear edge first.
16
Step 13: Secure it with the screws.
17
"Step 14: With an assistant, return the microwave oven to the cabinet and push it into position. "
18
Step 15: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
19
Step 16: Replace the support and align the turntable on the coupling.
20
Step 17: Turn on the power supply back on to the microwave.
21
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the line fuse on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the line fuse is if the microwave will not work at all.
All of the information for this microwave fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Line Fuse Replacement
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
Step 1: You will need a Phillips-head screwdriver or a quarter-inch nut driver and an assistant to help move heavy microwave.
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and remove any racks from the oven along with the turntable and support.
7
Step 4: Now use a Phillips-head screwdriver to unthread the two screws securing the mounting flanges to the cabinet.
8
Step 5: Remove the washers as well if still intact.
9
Step 6: Now have an assistant to help you pull the appliance out of the cabinet and set it on a sturdy surface.
10
Step 7: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
11
Step 8: Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread the four screws securing the top access panel.
12
Step 9: Lift the panel up then slide forward to remove.
13
Step 10: Pull the old fuse out of the holder.
14
Step 11: Install the new line fuse by inserting it into the holder.
15
Step 12: Replace the top access panel by inserting the rear edge first.
16
Step 13: Secure it with the screws.
17
"Step 14: With an assistant, return the microwave oven to the cabinet and push it into position. "
18
Step 15: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
19
Step 16: Replace the support and align the turntable on the coupling.
20
Step 17: Turn on the power supply back on to the microwave.
21
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Related Articles & Videos