In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Dishwasher Upper Dish Rack Replacement #A01986801
Kenmore Dishwasher Upper Dish Rack Replacement #A01986801
Skill Level
Total Parts Cost
$137.49Estimated Savings
$112.5002:31
- Description
This video provides step-by-step instructions for replacing the upper dish rack assembly on Kenmore dishwashers. The most common reason for replacing the dish rack is if it is damaged.
All of the information in this upper dish rack replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
All of the information in this upper dish rack replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
Step By Step Instructions
1
To replace the upper dish rack assembly in your dishwasher use a small flat-head screwdriver to release the retaining tabs on the front dish rack stop clips and remove both clips
2
Slide out the old dish rack assembly.
3
You’re now ready to prepare the new upper dish rack assembly for installation.
4
Align the left side roller assembly on the left side of the new rack.
5
Slide the assembly back and snap it into place.
6
Repeat for the right side roller assembly.
7
Next, align the upper wash arm support on the bottom of the rack and snap it into place.
8
If desired, you can transfer the cup holders from the old model rack to the new one.
9
Now align the rollers on the roller supports and slide the rack back.
10
Reposition the front stop clips on the supports and snap them closed. Keep in mind – you can change the height of the dish rack by releasing the retaining tabs on the two roller assemblies to adjust them.
Description
This video provides step-by-step instructions for replacing the upper dish rack assembly on Kenmore dishwashers. The most common reason for replacing the dish rack is if it is damaged.
All of the information in this upper dish rack replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
All of the information in this upper dish rack replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
To replace the upper dish rack assembly in your dishwasher use a small flat-head screwdriver to release the retaining tabs on the front dish rack stop clips and remove both clips
2
Slide out the old dish rack assembly.
3
You’re now ready to prepare the new upper dish rack assembly for installation.
4
Align the left side roller assembly on the left side of the new rack.
5
Slide the assembly back and snap it into place.
6
Repeat for the right side roller assembly.
7
Next, align the upper wash arm support on the bottom of the rack and snap it into place.
8
If desired, you can transfer the cup holders from the old model rack to the new one.
9
Now align the rollers on the roller supports and slide the rack back.
10
Reposition the front stop clips on the supports and snap them closed. Keep in mind – you can change the height of the dish rack by releasing the retaining tabs on the two roller assemblies to adjust them.
Applicable Product Model
Parts Needed
Upper Dishrack Assembly
$137.49
Total$0.00
Related Articles & Videos