In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Dishwasher Heating Element Replacement #154825001
Kenmore Dishwasher Heating Element Replacement #154825001
Skill Level
Total Parts Cost
$66.80Estimated Savings
$112.5003:02
- Description
This video provides step-by-step instructions for replacing the heating element on Kenmore dishwashers. The most common reason for replacing the heating element is if the dishes are not washing or drying properly.
All of the information in this element replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver, 1/2" wrench
All of the information in this element replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver, 1/2" wrench
Step By Step Instructions
1
Before you replace the heating element in your dishwasher be sure to turn off the power to the appliance.
2
Using a phillips-head screwdriver, unthread the mounting screws securing the lower access panels.
3
Set both panels aside.
4
Reach under the dishwasher and disconnect the heating element wires.
5
Using a half-inch wrench unthread the nuts securing the heating element.
6
Slide out the lower dish rack and detach the lower wash arm assembly.
7
You can now lift the heating element terminals out of the tub base and detach the old element from the brackets.
8
Install the new heating element by securing the element in the brackets then insert the terminals into the holes in the tub base.
9
Realign the lower wash arm assembly and snap it onto the support.
10
Replace the lower dish rack.
11
Thread and tighten the nuts to secure the heating element terminals.
12
Connect the wires to the terminals.
13
Realign both lower access panels and replace the screws to secure.
14
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the heating element on Kenmore dishwashers. The most common reason for replacing the heating element is if the dishes are not washing or drying properly.
All of the information in this element replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver, 1/2" wrench
All of the information in this element replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver, 1/2" wrench
Step-By-Step Instructions
1
Before you replace the heating element in your dishwasher be sure to turn off the power to the appliance.
2
Using a phillips-head screwdriver, unthread the mounting screws securing the lower access panels.
3
Set both panels aside.
4
Reach under the dishwasher and disconnect the heating element wires.
5
Using a half-inch wrench unthread the nuts securing the heating element.
6
Slide out the lower dish rack and detach the lower wash arm assembly.
7
You can now lift the heating element terminals out of the tub base and detach the old element from the brackets.
8
Install the new heating element by securing the element in the brackets then insert the terminals into the holes in the tub base.
9
Realign the lower wash arm assembly and snap it onto the support.
10
Replace the lower dish rack.
11
Thread and tighten the nuts to secure the heating element terminals.
12
Connect the wires to the terminals.
13
Realign both lower access panels and replace the screws to secure.
14
With the repair completed turn the power back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos