In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKenmore Dishwasher Control Panel Replacement #154645003
Kenmore Dishwasher Control Panel Replacement #154645003
Skill Level
Total Parts Cost
$64.56Estimated Savings
$112.5004:24
- Description
This video provides step-by-step instructions for replacing the control panel on Kenmore dishwashers. The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
All of the information in this panel replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
Step By Step Instructions
1
Before you replace the control panel on your dishwasher be sure to turn off the power to the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the control panel assembly to the door.
3
Because the outer door panel is sharp, be careful not to put stress on the wiring.
4
Next, unthread the screws securing the control board cover.
5
Depress the catch to detach the cover.
6
Note the orientation of the wire connecters them disconnect them from the board.
7
Disconnect the ribbon connecter as well.
8
Unthread the screws securing the control board and remove the board.
9
Pull the retaining tab back to detach the user interface board.
10
Remove the gasket.
11
Prepare the new control panel for installation by transferring the overlay from the old panel to the new one.
12
Position the user interface board gasket in the panel.
13
Align the interface board and snap it into place.
14
Position the control board and secure it with the screws.
15
Connect the ribbon connecter along with the other wire connecters.
16
Align the cover and snap it into place.
17
Replace the screws.
18
Position the control panel assembly on the door and secure it with the screws.
19
With the repair completed turn the power back on and your dishwasher should be ready for use.
Description
This video provides step-by-step instructions for replacing the control panel on Kenmore dishwashers. The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
All of the information in this panel replacement video is applicable to the following brands: Kenmore
Tools used: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the control panel on your dishwasher be sure to turn off the power to the appliance.
2
Use a phillips-head screwdriver to unthread the screws securing the control panel assembly to the door.
3
Because the outer door panel is sharp, be careful not to put stress on the wiring.
4
Next, unthread the screws securing the control board cover.
5
Depress the catch to detach the cover.
6
Note the orientation of the wire connecters them disconnect them from the board.
7
Disconnect the ribbon connecter as well.
8
Unthread the screws securing the control board and remove the board.
9
Pull the retaining tab back to detach the user interface board.
10
Remove the gasket.
11
Prepare the new control panel for installation by transferring the overlay from the old panel to the new one.
12
Position the user interface board gasket in the panel.
13
Align the interface board and snap it into place.
14
Position the control board and secure it with the screws.
15
Connect the ribbon connecter along with the other wire connecters.
16
Align the cover and snap it into place.
17
Replace the screws.
18
Position the control panel assembly on the door and secure it with the screws.
19
With the repair completed turn the power back on and your dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos