Order by 2:00 a.m., and we'll ship the same dayKelvinator Dryer DEA500G1W Parts
Factory-certified, genuine OEM Kelvinator Dryer DEA500G1W parts. All in-stock repair parts and accessories ship the same day.
Dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate. If the dryer is noisy then the rear bearing could be worn and require replacement.
Dryer thermal limiter (or thermal fuse). May be located on the blower housing or element. If the dryer overheats, the thermal fuse blows to cut off power to the dryer. If the thermal fuse has blown, the dryer won't start. The thermal fuse cannot be reset--if the fuse has blown, it must be replaced
Door Catch
Bearing cup for drum support ball
Air duct seal
Door strike
High temp adhesive
Main terminal block for power cord
Condenser coil cleaning brush
Door catch kit
Drum drive belt, flat
Grounding ball
Dryer power cord. This cord is 6 feet long 4 wire
Bracket bearing support
6 foot 30 Amp 3 wire dryer cord.
