DescriptionThis video provides step-by-step repair instructions for replacing the dispenser overlay on a Frigidaire refrigerator (Model FFSS2315TS0). The most common reason for replacing the dispenser overlay is if the dispenser is not working.
All of the information for this refrigerator dispenser overlay replacement video is applicable to the following brands:
Frigidaire, Crosley, Electrolux, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: Phillips-head screwdriver.
Step-By-Step Instructions1
Before you replace the dispenser overlay on your refrigerator…
2
…be sure to unplug the power cord.
3
For better access, we recommend uninstalling the front dispenser panel.
5
…then use a phillips-head screwdriver to unthread the three lower screws securing the front dispenser panel.
6
Slide the panel up to detach…
7
…then disconnect the wire connecter.
8
Starting on a corner, peel the old overlay off.
9
Clean off any residue if required.
10
Prepare the new dispenser overlay for installation…
11
…by peeling off the backing to expose the adhesive.
12
Now align the overlay on the front panel and press firmly.
13
Reinstall the front panel by first connecting the wire connecter.
14
Align the tabs with the slots in the door and slide down.
15
Rethread the lower screws.
17
Plug the power cord back in…
18
…and your refrigerator should be ready for use.