Dispenser Selector Switch Assembly (part 241679101) - Frigidaire Refrigerator Repair Help

Print ContentSave Content

Skill Level

Total Parts Cost

$73.28

Estimated Savings

$112.50

01:55

Description

This video provides step-by-step repair instructions for replacing the refrigerator dispenser selector switch on a Frigidaire refrigerator (Model FFSS2315TS0). The most common reason for replacing the dispenser selector switch is when the refrigerator ice and water dispenser is not working.

All of the information for this refrigerator dispenser selector switch replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.

Tools used: A Phillips-head screwdriver.

Step By Step Instructions

Print Instructions

Frigidaire Refrigerator - Model FFSS2315TS0

Refrigerator Dispenser Selector Switch Assembly Replacement

Tools Needed

You will need a phillips-head screwdriver for this procedure.

Shock

Be sure to unplug the power cord.

Remove the drip tray, then use a phillips-head screwdriver to unthread the three lower screws securing the front dispenser panel.

Slide the panel up to detach, then disconnect the wire connecter.

Pull back the retaining clips to release the old selector switch assembly.

Install the new dispenser selector switch assembly by aligning it on the panel with the wire connecter facing the right side then snap the assembly into place.

Reinstall the front panel by first connecting the wire connecter.

Align the tabs with the slots in the door and slide down.

Rethread the lower screws.

Replace the drip tray.

Plug the power cord back in.

Congrats! Your refrigerator is now ready for use.