Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Top Load Washer Timer Replacement #131758600
Frigidaire Top Load Washer Timer Replacement #131758600
Skill Level
Total Parts Cost
$197.36Estimated Savings
$112.5002:00
- Description
This video provides step-by-step instructions for replacing the timer on Frigidaire top load washing machines. The most common reason for replacing the timer is if the washer won’t start or stops mid-cycle and other components prove not to be at fault.
All of the information in this timer replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Crosley, Universal
All of the information in this timer replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Crosley, Universal
Step By Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the timer on your washer, first remove the screws securing the control panel cover. and pull cover off.
3
Next, use a small flathead screwdriver to pull out the timer locking pin.
4
You can now pull off the timer knob and dial.
5
Remove the mounting screw.
6
Now pull back the locking tab and slide the timer to the right to detach it from the control panel.
7
Disconnect the wire harness and remove the old timer.
8
Install the new timer by first connecting the wire harness.
9
Now position the timer in the control panel and snap it into place.
10
Secure it with the mounting screw.
11
Align the dial and push it into place.
12
Pull out the locking pin reposition the knob and push the locking pin back in.
13
Replace the control panel cover and secure it with the screws.
14
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Description
This video provides step-by-step instructions for replacing the timer on Frigidaire top load washing machines. The most common reason for replacing the timer is if the washer won’t start or stops mid-cycle and other components prove not to be at fault.
All of the information in this timer replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Crosley, Universal
All of the information in this timer replacement video is applicable to the following brands: Frigidaire, Westinghouse, Gibson, Crosley, Universal
Step-By-Step Instructions
1
As with any repair, you should unplug the appliance before beginning.
2
To replace the timer on your washer, first remove the screws securing the control panel cover. and pull cover off.
3
Next, use a small flathead screwdriver to pull out the timer locking pin.
4
You can now pull off the timer knob and dial.
5
Remove the mounting screw.
6
Now pull back the locking tab and slide the timer to the right to detach it from the control panel.
7
Disconnect the wire harness and remove the old timer.
8
Install the new timer by first connecting the wire harness.
9
Now position the timer in the control panel and snap it into place.
10
Secure it with the mounting screw.
11
Align the dial and push it into place.
12
Pull out the locking pin reposition the knob and push the locking pin back in.
13
Replace the control panel cover and secure it with the screws.
14
You’re now ready to plug the power cord back in and confirm that the washer is functioning properly.
Applicable Product Model
Related Articles & Videos