In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Washer Hub Nut Replacement WH02X10363
This video provides step-by-step repair instructions for replacing the hub nut in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
GE Washer Hub Nut Replacement WH02X10363
Total Parts Cost
$NaN03:07
- Description
This video provides step-by-step repair instructions for replacing the hub nut in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
To replace the hub nut in your ge washer, you will need an impact driver with socket adapter or ratchet with extension, a 33mm deep well socket, a 3/8” to ½” adapter, an 11mm socket, and a phillips screwdriver.
2
Remove the fabric softener dispenser.
3
Align the raised bump with the opening on the auger
4
Use the screwdriver to puncture through the inner shaft of the auger, then twist clockwise until the auger releases and lift it out. this will be difficult. be sure to hold the basket from rotating.
5
Unthread the 11mm bolt.
6
Lift out the base.
7
Unthread the 33mm nut. this will be difficult.
8
To install the new hub nut, thread the 33mm nut going counter-clockwise.
9
Align the base with the spline shaft and set it into the appliance.
10
Rethread the 11mm bolt to secure.
11
Set the auger over the tabs and twist counter-clockwise to lock it in place.
12
Align the dispenser to the grooves of the auger and press firmly to secure in place, and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the hub nut in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
This video provides step-by-step repair instructions for replacing the hub nut in a GE washer (Model GTW465ASN2WW). The most common reason for replacing this part is if it's missing or broken.
This replacement video is applicable to the following brands:
GE
Screws affiliated with washer-
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
To replace the hub nut in your ge washer, you will need an impact driver with socket adapter or ratchet with extension, a 33mm deep well socket, a 3/8” to ½” adapter, an 11mm socket, and a phillips screwdriver.
2
Remove the fabric softener dispenser.
3
Align the raised bump with the opening on the auger
4
Use the screwdriver to puncture through the inner shaft of the auger, then twist clockwise until the auger releases and lift it out. this will be difficult. be sure to hold the basket from rotating.
5
Unthread the 11mm bolt.
6
Lift out the base.
7
Unthread the 33mm nut. this will be difficult.
8
To install the new hub nut, thread the 33mm nut going counter-clockwise.
9
Align the base with the spline shaft and set it into the appliance.
10
Rethread the 11mm bolt to secure.
11
Set the auger over the tabs and twist counter-clockwise to lock it in place.
12
Align the dispenser to the grooves of the auger and press firmly to secure in place, and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos