KitchenAid Dishwasher Front Upper Dishrack Handle Replacement W11268682

Total Parts Cost

$NaN

01:22

Description

This video provides step-by-step repair instructions for replacing the front upper dishrack handle on a KitchenAid dishwasher. The most common reason for replacing this part is if it is damaged or missing.

All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag

Step By Step Instructions

Print Instructions

To replace the front upper dishrack handle in this kitchenaid dishwasher, you will need a t-15 torx bit.

Pull out the upper dishrack, and use the t-15 torx bit to unthread the two screws to separate the two halves of the handle.

To install the new front upper dishrack handle, align it on the front of the rack in the middle, position the rear section of the handle, then thread the two screws to secure.

Description

Step-By-Step Instructions

To replace the front upper dishrack handle in this kitchenaid dishwasher, you will need a t-15 torx bit.

Pull out the upper dishrack, and use the t-15 torx bit to unthread the two screws to separate the two halves of the handle.

To install the new front upper dishrack handle, align it on the front of the rack in the middle, position the rear section of the handle, then thread the two screws to secure.