In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Dishwasher Float Switch Replacement W11545764
This video provides step-by-step repair instructions for replacing the float switch on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher is not filling properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
KitchenAid Dishwasher Float Switch Replacement W11545764
Total Parts Cost
$NaN03:09
- Description
This video provides step-by-step repair instructions for replacing the float switch on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher is not filling properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step By Step Instructions
1
To replace the float switch in this kitchenaid dishwasher, you will need a 5/16th inch nut driver.
2
Before you begin the procedure, turn off the power to the dishwasher.
3
Use the 5/16th inch nut driver to unthread the two screws securing the lower access panel and toe panel to the frame.
4
With the screws unthreaded, you can set the panels aside.
5
Pull out the remaining insulation.
6
Depress the side retaining clips so you can pull the drip tray forward.
7
Release the tabs and fully detach the float switch from the tray.
8
Disconnect the wire connecter and fully remove the old switch.
9
To install the new float switch, first connect the wire connecter.
10
Partially reposition the drip tray and snap the switch into the tray.
11
Now fully reposition the tray, snapping it into place.
12
Realign the insulation.
13
Now realign the toe panel and insulation, then reposition the access panel, and thread the two screws to secure.
14
Turn the power supply back on, and the dishwasher should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the float switch on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher is not filling properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
This video provides step-by-step repair instructions for replacing the float switch on a KitchenAid dishwasher. The most common reason for replacing this part is if the dishwasher is not filling properly.
All of the information for this replacement video is applicable to the following brands:
Kenmore, KitchenAid, Whirlpool, Ikea, Amana, Jenn Air, Maytag
Step-By-Step Instructions
1
To replace the float switch in this kitchenaid dishwasher, you will need a 5/16th inch nut driver.
2
Before you begin the procedure, turn off the power to the dishwasher.
3
Use the 5/16th inch nut driver to unthread the two screws securing the lower access panel and toe panel to the frame.
4
With the screws unthreaded, you can set the panels aside.
5
Pull out the remaining insulation.
6
Depress the side retaining clips so you can pull the drip tray forward.
7
Release the tabs and fully detach the float switch from the tray.
8
Disconnect the wire connecter and fully remove the old switch.
9
To install the new float switch, first connect the wire connecter.
10
Partially reposition the drip tray and snap the switch into the tray.
11
Now fully reposition the tray, snapping it into place.
12
Realign the insulation.
13
Now realign the toe panel and insulation, then reposition the access panel, and thread the two screws to secure.
14
Turn the power supply back on, and the dishwasher should be ready for use.
Applicable Product Model
Related Articles & Videos