In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Dryer Inner Drum Slide Replacement #WE1M1067
GE Dryer Inner Drum Slide Replacement #WE1M1067
Skill Level
Total Parts Cost
$21.95Estimated Savings
$112.5002:22
- Description
This video provides step-by-step repair instructions for replacing the inner drum slide, glide, or pad on a GE gas dryer. The most common reason for replacing the drum slides is when the slides are worn-out and the dryer is making noise.
All of the information for this inner drum slide replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
All of the information for this inner drum slide replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the control panel to release it.
3
Next, open the dryer door and remove the screws inside the door frame which secure the main top.
4
Carefully unhook the control panel tabs from the main top, then lift up the top and remove.
5
Uninstall the screws securing the front panel.
6
Lift the front panel up to remove.
7
If still intact, remove the old slide from the drum slide bearing.
8
Install the new drum slide by hooking it onto the bearing tab and sliding it into place.
9
Reposition the front panel by first aligning the tabs in the base with the slots in the panel.
10
Now lift up the drum and snap the front panel into place.
11
Secure the screws.
12
Replace the main top by aligning the slots in the top with the tabs on the frame.
13
Then reinstall the screws in the doorframe to secure.
14
Reposition the control panel by inserting the tabs into the slots at the back of the main top.
15
Replace the screws in the back to secure.
16
You're now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Description
This video provides step-by-step repair instructions for replacing the inner drum slide, glide, or pad on a GE gas dryer. The most common reason for replacing the drum slides is when the slides are worn-out and the dryer is making noise.
All of the information for this inner drum slide replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
All of the information for this inner drum slide replacement video is applicable to the following brands:
GE, Hotpoint, RCA, Americana
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws at the rear of the control panel to release it.
3
Next, open the dryer door and remove the screws inside the door frame which secure the main top.
4
Carefully unhook the control panel tabs from the main top, then lift up the top and remove.
5
Uninstall the screws securing the front panel.
6
Lift the front panel up to remove.
7
If still intact, remove the old slide from the drum slide bearing.
8
Install the new drum slide by hooking it onto the bearing tab and sliding it into place.
9
Reposition the front panel by first aligning the tabs in the base with the slots in the panel.
10
Now lift up the drum and snap the front panel into place.
11
Secure the screws.
12
Replace the main top by aligning the slots in the top with the tabs on the frame.
13
Then reinstall the screws in the doorframe to secure.
14
Reposition the control panel by inserting the tabs into the slots at the back of the main top.
15
Replace the screws in the back to secure.
16
You're now ready to plug the power cord back in and confirm that the appliance is functioning properly.
Applicable Product Model
Parts Needed
Drum Slide Glide or Pad
$21.95
Total$0.00
Related Articles & Videos