In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairElectrolux Front-Load Washer Vibration Damper Replacement (part 134652000)
Electrolux Front-Load Washer Vibration Damper Replacement (part 134652000)
Skill Level
Total Parts Cost
$281.04Estimated Savings
$112.5002:03
- Description
This video provides step-by-step instructions for replacing the vibration damper on Electrolux washing machine. The most common reason for replacing the vibration damper is when the washing machine is vibrating or shaking.
All of the information in this vibration damper replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit.
All of the information in this vibration damper replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit.
Step By Step Instructions
1
Electrolux Front-Load Washer - Model EFLS627UTT
2
Front-Load Washer Vibration Damper Replacement
3
Tools & Assistance Needed
4
"You will need a Philips-head screwdriver (or a number two square drive bit) for this procedure, and you may need assistance."
5
Be sure to unplug the power cord.
6
Have an assistant help you to move the appliance away from the wall.
7
"Using a Philips-head screwdriver or a number two square drive bit, unthread the rear screws securing the top panel."
8
"Remove the panel, then unthread the screws securing the vibration damper."
9
Remove the old damper.
10
Install the new vibration damper by positioning it on the support and securing it with the screws.
11
Realign the top panel and secure it with the screws at the rear.
12
Move the appliance back against the wall and plug the power cord back in.
13
Congrats! Your front-load washer is ready for use.
Description
This video provides step-by-step instructions for replacing the vibration damper on Electrolux washing machine. The most common reason for replacing the vibration damper is when the washing machine is vibrating or shaking.
All of the information in this vibration damper replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit.
All of the information in this vibration damper replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit.
Step-By-Step Instructions
1
Electrolux Front-Load Washer - Model EFLS627UTT
2
Front-Load Washer Vibration Damper Replacement
3
Tools & Assistance Needed
4
"You will need a Philips-head screwdriver (or a number two square drive bit) for this procedure, and you may need assistance."
5
Be sure to unplug the power cord.
6
Have an assistant help you to move the appliance away from the wall.
7
"Using a Philips-head screwdriver or a number two square drive bit, unthread the rear screws securing the top panel."
8
"Remove the panel, then unthread the screws securing the vibration damper."
9
Remove the old damper.
10
Install the new vibration damper by positioning it on the support and securing it with the screws.
11
Realign the top panel and secure it with the screws at the rear.
12
Move the appliance back against the wall and plug the power cord back in.
13
Congrats! Your front-load washer is ready for use.
Applicable Product Model
Parts Needed
Counterweight
$281.04
Total$0.00
Related Articles & Videos
07:53
Part Replacement
Electrolux Front-Load Washer Door Boot Seal Replacement (part 5304505004)
08:08
Part Replacement
Electrolux Front-Load Washer Sump Filter Replacement (part 5304505165)
06:59
Part Replacement
Electrolux Front-Load Washer Drain Pump Assembly Replacement (part 5304514775)
04:11
Part Replacement
Electrolux Front-Load Washer Water Valve Assembly Replacement (part 5304514790)