Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Gas Range Spark Module Replacement (808608804)
Frigidaire Gas Range Spark Module Replacement (808608804)
Skill Level
Total Parts Cost
$65.15Estimated Savings
$112.5005:59
- Description
This video provides step-by-step instructions for replacing the spark module on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: 3/16th-inch socket or nut driver, quarter-inch socket or nut driver & a Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: 3/16th-inch socket or nut driver, quarter-inch socket or nut driver & a Phillips-head screwdriver.
Step By Step Instructions
1
Before you replace the spark module in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Lift off the three grates, remove all of the burner caps, and lift the center burner base straight up to remove.
5
Using a 3/16 inch socket or nut driver, unthread the mounting screws securing the front and rear burner bases.
6
With the screws on threaded, lift each base straight up to remove.
7
Next, use a quarter inch socket or nut driver to unthread all of the screws securing the officeholders to the main top.
8
Pull off the control knobs.
9
You can use string or wire to help pry them off.
10
Open the oven door and use a Phillips head screwdriver to unthread the two mounting screws securing the valve control panel.
11
Remove the panel.
12
Unthread the two screws securing the main top.
13
You can now pull the main top forward and lift up to remove.
14
Note the orientation of the wires, then disconnect them from the spark module.
15
Use the Phillips head screwdriver to unthread the screw securing the mounting bracket.
16
Depress the tabs to release the old module from the bracket.
17
Install the new spark module by snapping it into place in the bracket.
18
Align the bracket on the frame and thread the screw to secure.
19
Connect the wires to the appropriate terminals.
20
Reinstall the main top by aligning the rear edge under the retaining tabs.
21
Confirm that the officeholders and igniters protrude through the holes in the top.
22
Thread the two screws to secure.
23
Reinstall the valve control panel by aligning the slots at the top with the bracket tabs.
24
Then, thread the mounting screws.
25
Replace the control knobs.
26
Thread all of the screws to secure the officeholders to the main top.
27
We position the burner bases so the igniter aligns with the notch in the base.
28
Thread the mounting screws to secure the front and rear bases.
29
Realign all the burner caps.
30
Reinstall the grates.
31
Turn the gas supply back on.
32
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the spark module on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: 3/16th-inch socket or nut driver, quarter-inch socket or nut driver & a Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: 3/16th-inch socket or nut driver, quarter-inch socket or nut driver & a Phillips-head screwdriver.
Step-By-Step Instructions
1
Before you replace the spark module in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Shut off the gas supply as well.
4
Lift off the three grates, remove all of the burner caps, and lift the center burner base straight up to remove.
5
Using a 3/16 inch socket or nut driver, unthread the mounting screws securing the front and rear burner bases.
6
With the screws on threaded, lift each base straight up to remove.
7
Next, use a quarter inch socket or nut driver to unthread all of the screws securing the officeholders to the main top.
8
Pull off the control knobs.
9
You can use string or wire to help pry them off.
10
Open the oven door and use a Phillips head screwdriver to unthread the two mounting screws securing the valve control panel.
11
Remove the panel.
12
Unthread the two screws securing the main top.
13
You can now pull the main top forward and lift up to remove.
14
Note the orientation of the wires, then disconnect them from the spark module.
15
Use the Phillips head screwdriver to unthread the screw securing the mounting bracket.
16
Depress the tabs to release the old module from the bracket.
17
Install the new spark module by snapping it into place in the bracket.
18
Align the bracket on the frame and thread the screw to secure.
19
Connect the wires to the appropriate terminals.
20
Reinstall the main top by aligning the rear edge under the retaining tabs.
21
Confirm that the officeholders and igniters protrude through the holes in the top.
22
Thread the two screws to secure.
23
Reinstall the valve control panel by aligning the slots at the top with the bracket tabs.
24
Then, thread the mounting screws.
25
Replace the control knobs.
26
Thread all of the screws to secure the officeholders to the main top.
27
We position the burner bases so the igniter aligns with the notch in the base.
28
Thread the mounting screws to secure the front and rear bases.
29
Realign all the burner caps.
30
Reinstall the grates.
31
Turn the gas supply back on.
32
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
01:25
Part Replacement
Frigidaire Gas Range Right Front Burner Base Replacement (316438400)