Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Gas Range Clock Control Panel Replacement (5304509065)
Frigidaire Gas Range Clock Control Panel Replacement (5304509065)
Skill Level
Total Parts Cost
$198.20Estimated Savings
$112.5003:46
- Description
This video provides step-by-step instructions for replacing the clock control panel on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver & a Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver & a Phillips-head screwdriver.
Step By Step Instructions
1
Before you replace the clock control panel on your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Have an assistant help you to move the range away from the wall.
4
Using a quarter inch socket or nut driver, unthread the six screws to release the upper rear access panel.
5
Depress the retaining tab to disconnect the clock control wire connector.
6
Use a Phillips head screwdriver to unthread the four mounting screws to release the clock control from the support braces.
7
Depress the side retaining tabs to release the oven light switch from the control panel.
8
Detach the wires next.
9
Unthread the lower mounting screws securing the control panel.
10
Unthread the upper mounting screws and you can remove the old panel.
11
Install the new clock control panel by positioning it on the endcaps.
12
Thread the upper and lower mounting screws.
13
Reinstall the oven light switch by first connecting the wires to the terminals, then snap the switch into place on the new control panel.
14
Position the clock control on the support braces and thread the four mounting screws.
15
Connect the wire connector.
16
Reinstall the rear access panel by aligning the tabs behind the lip of the control panel.
17
Thread the screws to hold it in place.
18
Move the appliance back against the wall.
19
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the clock control panel on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver & a Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver & a Phillips-head screwdriver.
Step-By-Step Instructions
1
Before you replace the clock control panel on your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Have an assistant help you to move the range away from the wall.
4
Using a quarter inch socket or nut driver, unthread the six screws to release the upper rear access panel.
5
Depress the retaining tab to disconnect the clock control wire connector.
6
Use a Phillips head screwdriver to unthread the four mounting screws to release the clock control from the support braces.
7
Depress the side retaining tabs to release the oven light switch from the control panel.
8
Detach the wires next.
9
Unthread the lower mounting screws securing the control panel.
10
Unthread the upper mounting screws and you can remove the old panel.
11
Install the new clock control panel by positioning it on the endcaps.
12
Thread the upper and lower mounting screws.
13
Reinstall the oven light switch by first connecting the wires to the terminals, then snap the switch into place on the new control panel.
14
Position the clock control on the support braces and thread the four mounting screws.
15
Connect the wire connector.
16
Reinstall the rear access panel by aligning the tabs behind the lip of the control panel.
17
Thread the screws to hold it in place.
18
Move the appliance back against the wall.
19
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
01:25
Part Replacement
Frigidaire Gas Range Right Front Burner Base Replacement (316438400)