Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Gas Range Clock Control Overlay Replacement (316220729)
Frigidaire Gas Range Clock Control Overlay Replacement (316220729)
Skill Level
Total Parts Cost
$16.32Estimated Savings
$112.5003:11
- Description
This video provides step-by-step instructions for replacing the clock control overlay on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
Step By Step Instructions
1
Before you replace the clock control overlay in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Have an assistant help you to move the range away from the wall.
4
Using a quarter inch socket or nut driver, unthread the six screws to release the upper rear access panel.
5
Depress the retaining tab to disconnect the clock control wire connector.
6
Use a Phillips head screwdriver to unthread the four mounting screws to release the clock control from the support braces.
7
You can now peel off the old overlay.
8
Clean off any residue.
9
Install the new clock control overlay by peeling off the backing to expose the adhesive.
10
Then, align the overlay on the clock control and press firmly.
11
With the new overlay in place, peel off the protective cover.
12
Reposition the control on the support braces and thread the four mounting screws.
13
Connect the wire connector.
14
Reinstall the rear access panel by aligning the tabs behind the lip of the control panel.
15
Thread the screws to hold it in place.
16
Move the appliance back against the wall.
17
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the clock control overlay on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver, & a Phillips-head screwdriver.
Step-By-Step Instructions
1
Before you replace the clock control overlay in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Have an assistant help you to move the range away from the wall.
4
Using a quarter inch socket or nut driver, unthread the six screws to release the upper rear access panel.
5
Depress the retaining tab to disconnect the clock control wire connector.
6
Use a Phillips head screwdriver to unthread the four mounting screws to release the clock control from the support braces.
7
You can now peel off the old overlay.
8
Clean off any residue.
9
Install the new clock control overlay by peeling off the backing to expose the adhesive.
10
Then, align the overlay on the clock control and press firmly.
11
With the new overlay in place, peel off the protective cover.
12
Reposition the control on the support braces and thread the four mounting screws.
13
Connect the wire connector.
14
Reinstall the rear access panel by aligning the tabs behind the lip of the control panel.
15
Thread the screws to hold it in place.
16
Move the appliance back against the wall.
17
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
01:25
Part Replacement
Frigidaire Gas Range Right Front Burner Base Replacement (316438400)