DescriptionThis video provides step-by-step instructions for replacing the primer bulb on Homelite leaf blowers.
All of the information in this primer bulb replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: Phillips-head screwdriver.
Step-By-Step Instructions1
Homelite Hand-Held Leaf Blower - Model UT09526
2
Leaf Blower Primer Bulb Replacement
4
You will need a a phillips-head screwdriver for this procedure.
5
Make sure the engine has cooled.
6
Remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
7
"For better access, remove the air filter cover by lifting the tab to release."
8
"Using a phillips-head screwdriver, unthread the two screws securing the primer bulb mounting plate."
9
Lift off the plate and remove the old primer bulb.
10
Install the new primer bulb by inserting it into the plate.
11
Align the plate on the primer base and thread the screws to secure.
12
"Make sure the air filter gasket is properly positioned on the filter base, then realign the cover and snap it into place."
13
Reattach the wire and boot to the spark plug.
14
Congrats! Your leaf blower is ready for use.