In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairRefrigerator Water Filter Base (part 242009602) - Frigidaire Refrigerator Repair Help
Refrigerator Water Filter Base (part 242009602) - Frigidaire Refrigerator Repair Help
Skill Level
Total Parts Cost
$23.35Estimated Savings
$112.5002:22
- Description
This video provides step-by-step repair instructions for replacing the refrigerator water filter base on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator water filter base replacement video is applicable to the following brands:
Frigidaire, Kenmore, Westinghouse, Crosley.
Tools used: Putty knife, a Phillips-head screwdriver or number two square drive bit, & a 7/16th inch wrench.
All of the information for this refrigerator water filter base replacement video is applicable to the following brands:
Frigidaire, Kenmore, Westinghouse, Crosley.
Tools used: Putty knife, a Phillips-head screwdriver or number two square drive bit, & a 7/16th inch wrench.
Step By Step Instructions
1
Before you replace the water filter base in your refrigerator,
2
Be sure to unplug the power cord.
3
Press the water filter in firmly to unlock, then pull straight out.
4
Use a putty knife to help detach the side access panel.
5
Using a Philips head screwdriver or a number to square drive bit, unthread the screws securing the water filter cover.
6
Pull the cover straight forward to remove.
7
Note the orientation of the inlet and outlet water lines.
8
Then use a 7/16 inch wrench to depress the retaining rings to detach the lines.
9
Use the Phillips head screwdriver to unthread the four mounting screws securing the filter base to the housing.
10
With the screws unthreaded, pull the old base straight down to remove.
11
Install the new water filter base by pushing it into place in the housing, then thread the mounting screws to secure.
12
Insert the inlet and outlet water lines into the valve ports until fully seated.
13
Slide the cover into place and thread the screw.
14
Snap on the side access panel.
15
Reinstall the water filter by aligning the guides with the slots in the housing, then push the filter in until it locks into place.
16
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the refrigerator water filter base on a Frigidaire refrigerator (Model FFSS2315TS0).
All of the information for this refrigerator water filter base replacement video is applicable to the following brands:
Frigidaire, Kenmore, Westinghouse, Crosley.
Tools used: Putty knife, a Phillips-head screwdriver or number two square drive bit, & a 7/16th inch wrench.
All of the information for this refrigerator water filter base replacement video is applicable to the following brands:
Frigidaire, Kenmore, Westinghouse, Crosley.
Tools used: Putty knife, a Phillips-head screwdriver or number two square drive bit, & a 7/16th inch wrench.
Step-By-Step Instructions
1
Before you replace the water filter base in your refrigerator,
2
Be sure to unplug the power cord.
3
Press the water filter in firmly to unlock, then pull straight out.
4
Use a putty knife to help detach the side access panel.
5
Using a Philips head screwdriver or a number to square drive bit, unthread the screws securing the water filter cover.
6
Pull the cover straight forward to remove.
7
Note the orientation of the inlet and outlet water lines.
8
Then use a 7/16 inch wrench to depress the retaining rings to detach the lines.
9
Use the Phillips head screwdriver to unthread the four mounting screws securing the filter base to the housing.
10
With the screws unthreaded, pull the old base straight down to remove.
11
Install the new water filter base by pushing it into place in the housing, then thread the mounting screws to secure.
12
Insert the inlet and outlet water lines into the valve ports until fully seated.
13
Slide the cover into place and thread the screw.
14
Snap on the side access panel.
15
Reinstall the water filter by aligning the guides with the slots in the housing, then push the filter in until it locks into place.
16
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Water Filter Housing
$23.35
Total$0.00
Related Articles & Videos
02:52
Part Replacement
Lower Refrigerator Door Hinge (part 242034601) - Frigidaire Refrigerator Repair Help
03:22
Part Replacement
Refrigerator Air Damper Assembly (part 242303001) - Frigidaire Refrigerator Repair Help
03:10
Part Replacement
Refrigerator Light Socket (part 218906802) - Frigidaire Refrigerator Repair Help