In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairControl Panel Wire Harness (part 240388701) - Frigidaire Refrigerator Repair
Control Panel Wire Harness (part 240388701) - Frigidaire Refrigerator Repair
Skill Level
Total Parts Cost
$64.96Estimated Savings
$112.5003:20
- Description
This video provides step-by-step repair instructions for replacing the wire harness on a Frigidaire refrigerator (Model FFTR1814TW8). The most common reason for replacing the wire harness is when the refrigerator wire harness has become defective or has broken.
All of the information for this refrigerator wire harness replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver & a putty knife.
All of the information for this refrigerator wire harness replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver & a putty knife.
Step By Step Instructions
1
Frigidaire Refrigerator - FFTR1814TW8
2
Refrigerator Control Panel Wire Harness Replacement
3
Heavy, Sharp, Shock, Water
4
Be sure to unplug the power chord
5
Shock
6
Use a quarter-inch socket or nut driver to unthread the four screws securing the control panel to the upper liner
7
Disconnect the wire harness and pull the panel forward to remove
8
Use a putty knife to depress the tabs to release the old switch then disconnect the wires
9
Disconnect the light socket wires
10
Disconnect the thermostat power wires along with the grounding wire
11
Disconnect the wire harness from the defrost timer
12
Install the new control panel wire harness by first connecting the wire harness to the defrost timer
13
Connect the light switch wires, then realign and snap the switch into the panel
14
Connect the thermostat power wires and grounding wire to the appropriate terminals
15
Position the light socket wires in the channel UNDER the thermostat capillary tube then connect the wires to the light socket terminals
16
Insert the control panel drain tube into the hole on the rear liner then reconnect the wire harness
17
Realign the panel and thread the screws to secure
18
Shock
19
Plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the wire harness on a Frigidaire refrigerator (Model FFTR1814TW8). The most common reason for replacing the wire harness is when the refrigerator wire harness has become defective or has broken.
All of the information for this refrigerator wire harness replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver & a putty knife.
All of the information for this refrigerator wire harness replacement video is applicable to the following brands:
Frigidaire, White Westinghouse, Kelvinator, Gibson, Kenmore, Tappan, & Electrolux.
Tools used: Quarter-inch socket or nut driver & a putty knife.
Step-By-Step Instructions
1
Frigidaire Refrigerator - FFTR1814TW8
2
Refrigerator Control Panel Wire Harness Replacement
3
Heavy, Sharp, Shock, Water
4
Be sure to unplug the power chord
5
Shock
6
Use a quarter-inch socket or nut driver to unthread the four screws securing the control panel to the upper liner
7
Disconnect the wire harness and pull the panel forward to remove
8
Use a putty knife to depress the tabs to release the old switch then disconnect the wires
9
Disconnect the light socket wires
10
Disconnect the thermostat power wires along with the grounding wire
11
Disconnect the wire harness from the defrost timer
12
Install the new control panel wire harness by first connecting the wire harness to the defrost timer
13
Connect the light switch wires, then realign and snap the switch into the panel
14
Connect the thermostat power wires and grounding wire to the appropriate terminals
15
Position the light socket wires in the channel UNDER the thermostat capillary tube then connect the wires to the light socket terminals
16
Insert the control panel drain tube into the hole on the rear liner then reconnect the wire harness
17
Realign the panel and thread the screws to secure
18
Shock
19
Plug the power cord back in
Applicable Product Model
Parts Needed
Wire Harness
$64.96
Total$0.00
Related Articles & Videos
05:28
Part Replacement
Ice Maker Assembly (part IM116000) - Frigidaire Refrigerator Repair
03:37
Part Replacement
Temperature Control Thermostat (part 241537103) - Frigidaire Refrigerator Repair
05:20
Part Replacement
Defrost Heater Assembly (part 242044020) - Frigidaire Refrigerator Repair
02:20
Part Replacement
Refrigerator Lower Door Hinge (part 240314011) - Frigidaire Refrigerator Repair