In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairTroy-Bilt Snowblower Scraper Blade Replacement #731-08171
Troy-Bilt Snowblower Scraper Blade Replacement #731-08171
Total Parts Cost
$NaN01:12
- Description
This video provides step-by-step repair instructions for replacing the scraper blade on a Troy-Bilt snowblower. The most common reason for replacing the scraper blade is when it is worn-out.
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools needed: socket wrench
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools needed: socket wrench
Step By Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the scraper blade, your first step is to tip the snowblower back so it rests on its handle.
3
Note the orientation of the blade and remove the four nuts from the bolts holding the blade in place.
4
Pull the old blade off of the bolts and discard.
5
Install the new scraper blade by sliding it onto the bolts and aligning it with the auger housing.
6
Secure the blade with the nuts.
7
With the new blade in place, you can now tip the snowblower back to its upright position and return the start key to the ignition.
Description
This video provides step-by-step repair instructions for replacing the scraper blade on a Troy-Bilt snowblower. The most common reason for replacing the scraper blade is when it is worn-out.
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools needed: socket wrench
All of the information for this scraper blade replacement video is applicable to the following brands:
MTD, Craftsman, Troy-Bilt, Yard Machines, Cub Cadet, Yard-Man, Huskee
Tools needed: socket wrench
Step-By-Step Instructions
1
Before beginning this procedure, be sure to remove the snowblower’s start key from the ignition.
2
To replace the scraper blade, your first step is to tip the snowblower back so it rests on its handle.
3
Note the orientation of the blade and remove the four nuts from the bolts holding the blade in place.
4
Pull the old blade off of the bolts and discard.
5
Install the new scraper blade by sliding it onto the bolts and aligning it with the auger housing.
6
Secure the blade with the nuts.
7
With the new blade in place, you can now tip the snowblower back to its upright position and return the start key to the ignition.
Applicable Product Model
Related Articles & Videos