In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Washer Drive Belt Replacement #134051003
Frigidaire Affinity Washer Drive Belt Replacement #134051003
Skill Level
Total Parts Cost
$42.17Estimated Savings
$112.5001:18
- Description
This video provides step-by-step repair instructions for replacing the drive belt on a Frigidaire Affinity front-loading washing machine. The most common reasons for replacing the drive belt are when the washer is making loud noises, won’t agitate, won’t drain, won’t spin, or won’t spin or agitate.
All of the information for this drive belt replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse
Tools needed: screwdriver
All of the information for this drive belt replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse
Tools needed: screwdriver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws to release the back panel.
3
If still intact, remove the old belt by rotating the tub drive pulley while pulling the belt up and out. You’re now ready to install the new belt.
4
Making sure the ribbing is on the inside
5
First loop the belt onto the motor shaft pulley
6
Then position it onto the tub drive pulley.
7
Rotate the pulley to fully align the belt. Be aware this may require some effort.
8
Replace the back panel
9
Secure it with the screws.
10
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Description
This video provides step-by-step repair instructions for replacing the drive belt on a Frigidaire Affinity front-loading washing machine. The most common reasons for replacing the drive belt are when the washer is making loud noises, won’t agitate, won’t drain, won’t spin, or won’t spin or agitate.
All of the information for this drive belt replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse
Tools needed: screwdriver
All of the information for this drive belt replacement video is applicable to the following brands:
Frigidaire, Kenmore, Crosley, Electrolux, Westinghouse
Tools needed: screwdriver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the screws to release the back panel.
3
If still intact, remove the old belt by rotating the tub drive pulley while pulling the belt up and out. You’re now ready to install the new belt.
4
Making sure the ribbing is on the inside
5
First loop the belt onto the motor shaft pulley
6
Then position it onto the tub drive pulley.
7
Rotate the pulley to fully align the belt. Be aware this may require some effort.
8
Replace the back panel
9
Secure it with the screws.
10
You’re now ready to plug the appliance back in to make sure it’s functioning properly.
Applicable Product Model
Related Articles & Videos