Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Small Engine Muffler Replacement Part # 592362
Briggs & Stratton Small Engine Muffler Replacement Part # 592362
Skill Level
Total Parts Cost
$38.13Estimated Savings
$150.0002:24
- Description
This video provides step-by-step repair instructions for replacing the muffler on a Briggs and Stratton small engine. The most common reason for replacing the muffler is if the engine is too loud.
All of the information for this muffler replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: ¼ inch socket or nut driver, 5/16 inch socket or nut driver
All of the information for this muffler replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: ¼ inch socket or nut driver, 5/16 inch socket or nut driver
Step By Step Instructions
1
Before you replace the muffler on your engine first make sure the engine and muffler have cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 5/16th inch socket or nut driver to unthread the mounting screws securing the muffler.
4
Detach the old muffler and rotate to release it from the choke link.
5
Prepare the new muffler for installation by transferring the guard from the old muffler to the new one. Be aware you will need to use the 5/16th inch socket or nut driver to remove and thread the top screw and a quarter-inch socket or nut driver to remove and thread the screws on the left and right sides.
6
With the guard in place, hook the choke link onto the choke as you position the new muffler.
7
Thread and tighten the mounting screws to secure.
8
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the muffler on a Briggs and Stratton small engine. The most common reason for replacing the muffler is if the engine is too loud.
All of the information for this muffler replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: ¼ inch socket or nut driver, 5/16 inch socket or nut driver
All of the information for this muffler replacement video is applicable to the following brands:
Briggs & Stratton, MTD
Tools needed: ¼ inch socket or nut driver, 5/16 inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the muffler on your engine first make sure the engine and muffler have cooled.
2
Next, you should remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
3
Use a 5/16th inch socket or nut driver to unthread the mounting screws securing the muffler.
4
Detach the old muffler and rotate to release it from the choke link.
5
Prepare the new muffler for installation by transferring the guard from the old muffler to the new one. Be aware you will need to use the 5/16th inch socket or nut driver to remove and thread the top screw and a quarter-inch socket or nut driver to remove and thread the screws on the left and right sides.
6
With the guard in place, hook the choke link onto the choke as you position the new muffler.
7
Thread and tighten the mounting screws to secure.
8
With the repair completed reattach the wire and boot to the spark plug and your engine should be ready for use.
Related Articles & Videos
05:39
Part Replacement
Briggs & Stratton Small Engine Replace Carburetor Float Part # 591120
04:55
Part Replacement
Briggs & Stratton Small Engine Carburetor Replacement Part # 799584
03:07
Part Replacement
Briggs & Stratton Small Engine Ignition Coil Replacement Part # 593872
01:40
Part Replacement
Briggs & Stratton Small Engine Spark Plug Replacement Part # 692051