In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Top-Load Washer Drain Inlet Hose #137364100
Frigidaire Affinity Top-Load Washer Drain Inlet Hose #137364100
Skill Level
Total Parts Cost
$165.87Estimated Savings
$112.5002:52
- Description
This video provides step-by-step instructions for replacing the drain inlet hose on Frigidaire Affinity top-load washing machines. The most common reasons for replacing the hose are when the washer is leaking water or won’t drain, the drain inlet hose is at fault, and unclogging it does not fix the problem.
All of the information in this hose replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, pliers
All of the information in this hose replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, pliers
Step By Step Instructions
1
Before you replace the pump inlet tee hose in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, release the retaining clamp securing the tub outlet hose to the “tee” hose and pull the hose off – be prepared for some water to spill.
5
Now release the clamps securing the “tee” hose to the drain pump and the circulation pump and pull the old hose free of the pumps.
6
Prepare the new pump inlet “tee” hose for installation by transferring the retaining clamps from the old hose to the new one.
7
Now attach the longer end of the new hose to the circulation pump.
8
Attach the opposite end to the drain pump and secure the hose with the clamps.
9
Attach the tub outlet hose to the new “tee” hose and secure it with the clamp.
10
Replace the front panel by inserting the panel tabs into the slots in the side panels.
11
Push the panel up into position and replace the mounting screws.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the drain inlet hose on Frigidaire Affinity top-load washing machines. The most common reasons for replacing the hose are when the washer is leaking water or won’t drain, the drain inlet hose is at fault, and unclogging it does not fix the problem.
All of the information in this hose replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, pliers
All of the information in this hose replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the pump inlet tee hose in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, release the retaining clamp securing the tub outlet hose to the “tee” hose and pull the hose off – be prepared for some water to spill.
5
Now release the clamps securing the “tee” hose to the drain pump and the circulation pump and pull the old hose free of the pumps.
6
Prepare the new pump inlet “tee” hose for installation by transferring the retaining clamps from the old hose to the new one.
7
Now attach the longer end of the new hose to the circulation pump.
8
Attach the opposite end to the drain pump and secure the hose with the clamps.
9
Attach the tub outlet hose to the new “tee” hose and secure it with the clamp.
10
Replace the front panel by inserting the panel tabs into the slots in the side panels.
11
Push the panel up into position and replace the mounting screws.
12
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Parts Needed
Drain Hose
$165.87
Total$0.00
Related Articles & Videos