In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Washer Lid Latch Assembly #137353300
Frigidaire Affinity Washer Lid Latch Assembly #137353300
Skill Level
Total Parts Cost
$78.06Estimated Savings
$112.5002:26
- Description
This video provides step-by-step instructions for replacing the lid latch assembly on Frigidaire Affinity top-load washing machines. The most common reason for replacing the latch is when the lid won’t lock, causing the washer to not spin or agitate.
All of the information in this lid latch replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, flat-head screwdriver, wire cutters
All of the information in this lid latch replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, flat-head screwdriver, wire cutters
Step By Step Instructions
1
Before you replace the lid latch assembly in your washer Unplug the power cord.
2
Before you replace the lid latch assembly in your washer Unplug the power cord.
3
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
4
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
5
With the screws removed, slide the panel down and pull it out to detach.
6
With the screws removed, slide the panel down and pull it out to detach.
7
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly from the main top.
8
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly from the main top.
9
Note the orientation of the wires then disconnect them.
10
Note the orientation of the wires then disconnect them.
11
Cut the zip-tie securing the wires to fully release the old assembly.
12
Cut the zip-tie securing the wires to fully release the old assembly.
13
You’re now ready to install the new lid latch assembly. Connect the wires to the appropriate terminals on the new assembly.
14
You’re now ready to install the new lid latch assembly. Connect the wires to the appropriate terminals on the new assembly.
15
Secure the wires with a zip-tie.
16
Secure the wires with a zip-tie.
17
Snap the new assembly into place in the main top.
18
Snap the new assembly into place in the main top.
19
Replace the front panel by inserting the panel tabs into the slots in the side panels.
20
Replace the front panel by inserting the panel tabs into the slots in the side panels.
21
Push the panel up into position and replace the mounting screws.
22
Push the panel up into position and replace the mounting screws.
23
With the repair completed plug the power cord back in and your washer should be ready for use.
24
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the lid latch assembly on Frigidaire Affinity top-load washing machines. The most common reason for replacing the latch is when the lid won’t lock, causing the washer to not spin or agitate.
All of the information in this lid latch replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, flat-head screwdriver, wire cutters
All of the information in this lid latch replacement video is applicable to the following brands: Frigidaire
Tools used: #2 square-bit screwdriver, flat-head screwdriver, wire cutters
Step-By-Step Instructions
1
Before you replace the lid latch assembly in your washer Unplug the power cord.
2
Before you replace the lid latch assembly in your washer Unplug the power cord.
3
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
4
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
5
With the screws removed, slide the panel down and pull it out to detach.
6
With the screws removed, slide the panel down and pull it out to detach.
7
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly from the main top.
8
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly from the main top.
9
Note the orientation of the wires then disconnect them.
10
Note the orientation of the wires then disconnect them.
11
Cut the zip-tie securing the wires to fully release the old assembly.
12
Cut the zip-tie securing the wires to fully release the old assembly.
13
You’re now ready to install the new lid latch assembly. Connect the wires to the appropriate terminals on the new assembly.
14
You’re now ready to install the new lid latch assembly. Connect the wires to the appropriate terminals on the new assembly.
15
Secure the wires with a zip-tie.
16
Secure the wires with a zip-tie.
17
Snap the new assembly into place in the main top.
18
Snap the new assembly into place in the main top.
19
Replace the front panel by inserting the panel tabs into the slots in the side panels.
20
Replace the front panel by inserting the panel tabs into the slots in the side panels.
21
Push the panel up into position and replace the mounting screws.
22
Push the panel up into position and replace the mounting screws.
23
With the repair completed plug the power cord back in and your washer should be ready for use.
24
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Parts Needed
Door Latch
$78.06
Total$0.00
Related Articles & Videos