Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Top Load Washer Control Board 137469103
Frigidaire Affinity Top Load Washer Control Board 137469103
Skill Level
Total Parts Cost
$239.69Estimated Savings
$112.5002:46
- Description
This video provides step-by-step repair instructions for replacing the motor control board on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the motor control board are when the washer won’t agitate, won’t spin, or won’t spin or agitate.
All of the information for this motor control board replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver
All of the information for this motor control board replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver
Step By Step Instructions
1
Before you replace the motor control board in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, remove the screw securing the motor control board.
5
Slide the board out and note the orientation of the wire connecters.
6
Disconnect all of the connecters.
7
Install the new motor control board by first connecting the wire connecters to the appropriate terminals on the board.
8
With the wires connected, slide the new board onto the support. and replace the screw to secure.
9
Replace the front panel by inserting the panel tabs into the slots in the side panels.
10
Push the panel up into position and replace the mounting screws.
11
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the motor control board on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the motor control board are when the washer won’t agitate, won’t spin, or won’t spin or agitate.
All of the information for this motor control board replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver
All of the information for this motor control board replacement video is applicable to the following brands:
Frigidaire
Tools needed: #2 square-bit screwdriver
Step-By-Step Instructions
1
Before you replace the motor control board in your washer Unplug the power cord.
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, remove the screw securing the motor control board.
5
Slide the board out and note the orientation of the wire connecters.
6
Disconnect all of the connecters.
7
Install the new motor control board by first connecting the wire connecters to the appropriate terminals on the board.
8
With the wires connected, slide the new board onto the support. and replace the screw to secure.
9
Replace the front panel by inserting the panel tabs into the slots in the side panels.
10
Push the panel up into position and replace the mounting screws.
11
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos