Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Top-Loading Washer Pressure Switch #137055800
Frigidaire Affinity Top-Loading Washer Pressure Switch #137055800
Skill Level
Total Parts Cost
$73.59Estimated Savings
$112.5003:45
- Description
This video provides step-by-step repair instructions for replacing the pressure switch on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the pressure switch are when the washer is overflowing or is not filling properly.
All of the information for this pressure switch replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
All of the information for this pressure switch replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
Step By Step Instructions
1
Before you replace the pressure switch in your washer
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, remove the mounting screws securing the side panels to the main top.
5
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly.
6
Remove the bleach dispenser cover.
7
Use a phillips-head screwdriver to remove the screw securing the dispenser.
8
Depress the tabs to release the dispenser from the main top.
9
You can now lift up the main top and support it.
10
Depress the tabs on the pressure switch to release it from the rear panel.
11
Disconnect the wire connecter.
12
Use pliers to help release the retaining clamp securing the water pressure tube to the switch and pull the tube off.
13
Install the new pressure switch by first attaching the water pressure tube and securing it with the clamp.
14
Connect the wire connecter to the new switch and snap the switch into place on the rear panel.
15
Remove the support and lower the main top.
16
Confirm that the pins in the side of the panels are aligned with the holes in the top.
17
Snap the bleach dispenser into place on the main top.
18
Rethread the screw.
19
Replace the cover.
20
Next, secure the latch assembly in the main top.
21
Thread and tighten the mounting screws to secure the top.
22
Replace the front panel by inserting the panel tabs into the slots in the side panels.
23
Push the panel up into position and replace the mounting screws.
24
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the pressure switch on a Frigidaire Affinity top-loading washing machine. The most common reasons for replacing the pressure switch are when the washer is overflowing or is not filling properly.
All of the information for this pressure switch replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
All of the information for this pressure switch replacement video is applicable to the following brands:
Frigidaire
Tools needed: flat-head screwdriver, #2 square-bit screwdriver, Phillips-head screwdriver, pliers
Step-By-Step Instructions
1
Before you replace the pressure switch in your washer
2
Use a number two square-bit screwdriver to remove the mounting screws securing the bottom of the front panel.
3
With the screws removed, slide the panel down and pull it out to detach.
4
Next, remove the mounting screws securing the side panels to the main top.
5
Lift up the lid and use a flat-head screwdriver to help detach the latch assembly.
6
Remove the bleach dispenser cover.
7
Use a phillips-head screwdriver to remove the screw securing the dispenser.
8
Depress the tabs to release the dispenser from the main top.
9
You can now lift up the main top and support it.
10
Depress the tabs on the pressure switch to release it from the rear panel.
11
Disconnect the wire connecter.
12
Use pliers to help release the retaining clamp securing the water pressure tube to the switch and pull the tube off.
13
Install the new pressure switch by first attaching the water pressure tube and securing it with the clamp.
14
Connect the wire connecter to the new switch and snap the switch into place on the rear panel.
15
Remove the support and lower the main top.
16
Confirm that the pins in the side of the panels are aligned with the holes in the top.
17
Snap the bleach dispenser into place on the main top.
18
Rethread the screw.
19
Replace the cover.
20
Next, secure the latch assembly in the main top.
21
Thread and tighten the mounting screws to secure the top.
22
Replace the front panel by inserting the panel tabs into the slots in the side panels.
23
Push the panel up into position and replace the mounting screws.
24
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos