Order by 2:00 a.m., and we'll ship the same day
Price Match Guarantee
Order by 2:00 a.m., and we'll ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Affinity Top Load Washer Left Control Brd 37363800
Frigidaire Affinity Top Load Washer Left Control Brd 37363800
Skill Level
Total Parts Cost
$147.93Estimated Savings
$112.5002:07
- Description
This video provides step-by-step instructions for replacing the left user interface control board on Frigidaire Affinity top-load washing machines. The most common reason for replacing the board is when none of the controls are working and other more commonly defective parts have been checked.
All of the information in this control board replacement video is applicable to the following brands: Frigidaire
Tools used: small flat-head screwdriver, Phillips-head screwdriver
All of the information in this control board replacement video is applicable to the following brands: Frigidaire
Tools used: small flat-head screwdriver, Phillips-head screwdriver
Step By Step Instructions
1
Before you replace the left interface board in your washer Unplug the power cord.
2
Now insert a small flat-head screwdriver into the holes in the back of the control housing and press the retaining tabs down to release the front control panel.
3
Next, disconnect the wire connecters from the left interface board.
4
Use a phillips-head screwdriver to remove the screws securing the board and pull the board free.
5
Install the new left interface board by positioning it on the control panel.
6
Replace the screws to secure.
7
Connect the wire connecters to the new board and confirm that the wires are secured under the retainers.
8
Realign the control panel on the housing and snap it into place.
9
With the repair completed plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the left user interface control board on Frigidaire Affinity top-load washing machines. The most common reason for replacing the board is when none of the controls are working and other more commonly defective parts have been checked.
All of the information in this control board replacement video is applicable to the following brands: Frigidaire
Tools used: small flat-head screwdriver, Phillips-head screwdriver
All of the information in this control board replacement video is applicable to the following brands: Frigidaire
Tools used: small flat-head screwdriver, Phillips-head screwdriver
Step-By-Step Instructions
1
Before you replace the left interface board in your washer Unplug the power cord.
2
Now insert a small flat-head screwdriver into the holes in the back of the control housing and press the retaining tabs down to release the front control panel.
3
Next, disconnect the wire connecters from the left interface board.
4
Use a phillips-head screwdriver to remove the screws securing the board and pull the board free.
5
Install the new left interface board by positioning it on the control panel.
6
Replace the screws to secure.
7
Connect the wire connecters to the new board and confirm that the wires are secured under the retainers.
8
Realign the control panel on the housing and snap it into place.
9
With the repair completed plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos