In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairGE Electric Range Oven Light Socket Replacement #WB08T10004
GE Electric Range Oven Light Socket Replacement #WB08T10004
Total Parts Cost
$NaN01:41
- Description
This video provides step-by-step instructions for replacing the light socket on GE electric ranges. The most common reason for replacing the light socket is when the light is out and the bulb is not burned out.
All of the information in this light socket replacement video is applicable to the following brands: GE, Hotpoint, Kenmore, RCA
Tools used: 14” nut driver
All of the information in this light socket replacement video is applicable to the following brands: GE, Hotpoint, Kenmore, RCA
Tools used: 14” nut driver
Step By Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, release the wire retainer to remove the light lens cover.
4
Take out the bulb.
5
Depending on your model, remove the light socket access panel or the full back panel if necessary.
6
Detach the wires from the old light socket.
7
Squeeze the retaining clips to release the old socket then pull it out from the oven cavity.
8
Install the new light socket by lining up the clips with the slots in the socket housing and snap into position.
9
Reconnect the wires and replace the access or back panel.
10
Screw in the light bulb then replace the lens cover and secure it with the wire retainer.
11
Replace the oven racks and plug the appliance back in to make sure the socket is functioning properly.
Description
This video provides step-by-step instructions for replacing the light socket on GE electric ranges. The most common reason for replacing the light socket is when the light is out and the bulb is not burned out.
All of the information in this light socket replacement video is applicable to the following brands: GE, Hotpoint, Kenmore, RCA
Tools used: 14” nut driver
All of the information in this light socket replacement video is applicable to the following brands: GE, Hotpoint, Kenmore, RCA
Tools used: 14” nut driver
Step-By-Step Instructions
1
As with any repair, be sure you unplug the appliance before beginning.
2
Your first step is to remove the oven racks.
3
Next, release the wire retainer to remove the light lens cover.
4
Take out the bulb.
5
Depending on your model, remove the light socket access panel or the full back panel if necessary.
6
Detach the wires from the old light socket.
7
Squeeze the retaining clips to release the old socket then pull it out from the oven cavity.
8
Install the new light socket by lining up the clips with the slots in the socket housing and snap into position.
9
Reconnect the wires and replace the access or back panel.
10
Screw in the light bulb then replace the lens cover and secure it with the wire retainer.
11
Replace the oven racks and plug the appliance back in to make sure the socket is functioning properly.
Applicable Product Model
Related Articles & Videos