In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Front-Load Washer Replace Rotor Assembly #DC31-00112A
Samsung Front-Load Washer Replace Rotor Assembly #DC31-00112A
Total Parts Cost
$NaN01:46
- Description
This video provides step-by-step repair instructions for replacing the rotor assembly on a Samsung front-loading washing machine. The most common reasons for replacing the rotor are when the washer won’t spin, won’t agitate, or won’t spin or agitate.
All of the information for this rotor assembly replacement video is applicable to the following brands:
Samsung
Tools used: multi-screwdriver, Phillips head bit, 19mm socket, rubber mallet
All of the information for this rotor assembly replacement video is applicable to the following brands:
Samsung
Tools used: multi-screwdriver, Phillips head bit, 19mm socket, rubber mallet
Step By Step Instructions
1
To replace the rotor in your washer, first remove the screws securing the rear panel.
2
Now shift the panel up and pull it out from the bottom to remove.
3
Use a 19mm socket and strike it with a mallet to help loosen the rotor mounting bolt.
4
Unthread the bolt and pull off the old rotor.
5
Install the new rotor by aligning it on the tub drive shaft and stator.
6
Thread the mounting bolt and tighten with the socket and mallet.
7
Reinstall the rear panel by inserting the upper tabs into the slots then align the lower tabs and push the panel down.
8
Replace the screws.
9
With the repair completed, plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the rotor assembly on a Samsung front-loading washing machine. The most common reasons for replacing the rotor are when the washer won’t spin, won’t agitate, or won’t spin or agitate.
All of the information for this rotor assembly replacement video is applicable to the following brands:
Samsung
Tools used: multi-screwdriver, Phillips head bit, 19mm socket, rubber mallet
All of the information for this rotor assembly replacement video is applicable to the following brands:
Samsung
Tools used: multi-screwdriver, Phillips head bit, 19mm socket, rubber mallet
Step-By-Step Instructions
1
To replace the rotor in your washer, first remove the screws securing the rear panel.
2
Now shift the panel up and pull it out from the bottom to remove.
3
Use a 19mm socket and strike it with a mallet to help loosen the rotor mounting bolt.
4
Unthread the bolt and pull off the old rotor.
5
Install the new rotor by aligning it on the tub drive shaft and stator.
6
Thread the mounting bolt and tighten with the socket and mallet.
7
Reinstall the rear panel by inserting the upper tabs into the slots then align the lower tabs and push the panel down.
8
Replace the screws.
9
With the repair completed, plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos