In-stock parts ship the same day
Price Match Guarantee
In-stock parts ship the same dayGET PRO PRICING
Video & Articles: Appliance & Equipment RepairSamsung Washer Pressure Switch Replacement #DC96-01703F
Samsung Washer Pressure Switch Replacement #DC96-01703F
Total Parts Cost
$NaN01:55
- Description
This video provides step-by-step instructions for replacing the pressure switch on Samsung washing machines. The most common reason for replacing the pressure switch is when the washer is overflowing, the hose connecting the tub to the switch is not clogged or damaged, and testing the pressure switch proves it is at fault.
All of the information in this pressure switch replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit, pliers
All of the information in this pressure switch replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit, pliers
Step By Step Instructions
1
To replace the pressure switch in your washer, first remove the screws at the back securing the top panel.
2
Now slide the panel back and lift it off.
3
Disconnect the wire harness from the pressure switch.
4
Use pliers to depress the tabs to release the switch from the cabinet frame.
5
Now release the retaining clamp and pull the hose off of the old switch.
6
Install the new pressure switch by first attaching the hose then position the retaining clamp to secure.
7
Snap the new switch into place on the cabinet frame and connect the wire harness.
8
Reposition the top panel by aligning the edge of the panel with the tabs on the support bracket then push forward.
9
Replace the screws in the back.
10
With the repair completed, plug the power cord back in and your washer should be ready for use.
Description
This video provides step-by-step instructions for replacing the pressure switch on Samsung washing machines. The most common reason for replacing the pressure switch is when the washer is overflowing, the hose connecting the tub to the switch is not clogged or damaged, and testing the pressure switch proves it is at fault.
All of the information in this pressure switch replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit, pliers
All of the information in this pressure switch replacement video is applicable to the following brands: Samsung
Tools used: multi-screwdriver, Phillips head bit, pliers
Step-By-Step Instructions
1
To replace the pressure switch in your washer, first remove the screws at the back securing the top panel.
2
Now slide the panel back and lift it off.
3
Disconnect the wire harness from the pressure switch.
4
Use pliers to depress the tabs to release the switch from the cabinet frame.
5
Now release the retaining clamp and pull the hose off of the old switch.
6
Install the new pressure switch by first attaching the hose then position the retaining clamp to secure.
7
Snap the new switch into place on the cabinet frame and connect the wire harness.
8
Reposition the top panel by aligning the edge of the panel with the tabs on the support bracket then push forward.
9
Replace the screws in the back.
10
With the repair completed, plug the power cord back in and your washer should be ready for use.
Applicable Product Model
Related Articles & Videos