Name: Control Board
Brand: Carrier
SKU: i2347705
Price: 293.88 USD
Availability: InStock

The Frigidaire Oven Burner Igniter 5303935066 is a high-quality replacement part that ignites the gas to light the oven burner. It includes 2 ceramic wire connectors and replaces multiple part numbers

Igniter

Compressor run capacitor, 120 volts 15 mfd.

Run Capacitor

image

Payne Furnace Won't Work? Replace Control Board #HK42FZ018

Furnace not working? This video provides step-by-step instructions for replacing the control board on Payne furnaces. The most common reason for replacing the control board is when the furnace will not operate at all, but other more common problems have already been checked. All of the information in this control board replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, phillips head screwdriver, 1/4 inch socket or nut driver

Furnace

Furnace not heating

Control board assembly (1 stage) The control board regulates the supply of power to the furnace components. Be sure to check more commonly defective parts before replacing the control board.

The control board regulates the power supply to all of the components of the furnace. If the control board fails, it might not send voltage to the ignition system, causing the furnace not to heat.

Furnace starts then stops

The control board regulates the power supply to all of the components of the furnace. If the control board is defective, it might not send voltage to the ignition system, causing the furnace to shut off after a few minutes.

Furnace blower not running

The control board regulates the power supply to all of the components of the furnace. If the control board is defective, it might not send voltage to the blower motor.

Furnace blower runs all the time

The control board has relays that regulate the voltage to each component in the furnace. If the relay that controls the blower motor fails while it is closed, it will send continuous voltage to the blower motor, causing the motor to run continuously. If the control board is at fault, replace it. 

Furnace not turning on

The control board regulates the power supply to all of the components of the furnace. If the control board fails, it might not send voltage to the ignition system, causing the furnace to not turn on.

Furnace burners won't stay lit

The control board regulates the power supply to all of the components of the furnace. If the control board is defective, it might not send voltage to the ignition system, preventing the burner from staying lit.

Furnace takes too long to heat the home

The control board regulates the power supply to all of the components of the furnace. If the control board is faulty, it may only send intermittent voltage to the ignition system, causing the furnace to take too long to heat the home.

Furnace blower is running constantly but there is no heat

The control board has relays that regulate the voltage to each component in the furnace. If the relay that controls the blower motor fails while it is closed, it will send continuous voltage to the blower motor, causing the motor to run continuously. If the control board is at fault, replace it.


Strange smells coming from furnace

The control board regulates the power supply to all of the components of the furnace. If a component on the  control board fails it can produce a burning smell. If the control board is burnt it will need to be replaced. 


Furnace is frequently cycling/short cycling

The control board regulates the power supply to all of the components of the furnace. If the control board fails, it might  send intermittent voltage to the ignition system or blower, causing frequent cycling.

Furnace circuit breaker keeps tripping

The control board regulates the power supply to all of the components of the furnace. If the control board shorts out it can trip the circuit breaker. A shorted control board will usually have burn marks or smell burnt and will need to be replaced.

Furnace wall thermostat not working properly

The control board regulates the power supply to all of the components in the system. If the control board fails, it might not send voltage to the thermostat, leaving the thermostat inoperable.


**We’re excited to be able to offer trade professionals like you substantial volume-based discounts. Our PRO pricing levels are based on your anticipated annual parts spend with us. If your actual monthly spending trends lower than anticipated, your discount may change.

Frigidaire Appliance Parts and Heating & Cooling Parts.

Sign up for your PRO account

Create your account for exclusive discounts and benefits, like:

Your One-Stop

Shop

Join Frigidaire Pro to unlock technician pricing, same-day shipping, dedicated support, and exclusive benefits tailored for repair professionals.

PRO users get exclusive discounts and benefits, like:

This account is not eligible, please contact your customer service representative for any questions.

Unlock technician pricing and exclusive Pro benefits at Frigidaire. Join free today.

Frigidaire Pro

Frigidaire Pro | Discounts & Benefits for Technicians

Your discounted pricing and other Pro benefits are now available.

Thank You for joining Frigidaire Pro!

Return parts & products within 30 days of placing your order.

Adhesives & Sealants Parts

Appliance Adhesive & Sealant Parts

Air Filters

Air Filters for Home

Appliance Cleaners

Appliance Cleaners for Sale

Dishrack Parts

Dishrack Replacement Parts

Dryer Vents

Dryer Venting Parts

Equipment Covers

OPE, HVAC & Appliance Part Covers

Fuel Treatments

Fuel System Treatments

Hardware & Fasteners

Hardware and Fasteners Parts

Kitchen Appliance Accessories

Kitchen Accessories Parts

Washer & Dryer Accessories

Dryer and Washer Accessories

Light Bulb Parts

Light Bulb Fixture Parts

Oil & Lubricants

Oil and Lubricant Parts

Paint & Supplies

Touch Up Paint & Supplies

Power Cords Parts

Power Cord Repair Parts

Safety Equipment Parts

Safety Equipment Spare Parts

Testing Equipment Parts

Testing Appliance, OPE & HVAC Parts

Specialty Tools Parts

Specialty Tool Parts for Sale

Vacuum Attachments

Vacuum Attachment Parts

Water Filters & System Parts

Water Filter System Parts

Water Treatment Parts

Water Treatment System Parts

Wire & Connector Parts

OPE, HVAC & Appliance Wire & Connector Parts

Lawn Care Supplies

Yard Care Supplies

Heating & Cooling Supplies

HVAC Supplies

CHANNELLOCK Tools Parts

CHANNELLOCK Replacement Tools

Gas Cans & Nozzles

Nozzles & Gas Cans for Sale

Maintenance Repair Kits

Maintenance Appliance Repair Kits

OPE cleaners & Filters Parts

Outdoor Power Equipment Cleaners & Filters

Power Tools Parts

Power Tool Replacement Parts

Appliances

Refrigerator

Dryer

Range/Stove/Oven

Washing Machine

Dishwasher

Washer/Dryer Combo

Microwave

Freezer

Oven/Microwave Combo

Trash Compactor

Ice Machine

Range Vent Hood

Vacuum Cleaner

Garbage Disposer

Dehumidifier

Hot Water Dispenser

Heating & Cooling

Packaged Unit/RTU

Heat Pump

Central Air Conditioner

Air Conditioner

Air Handler

Humidifier

Carrier

Payne

Control Board

Circuit Board & Timer

Furnace blower runs all the time? This video provides information on how to troubleshoot a furnace blower that runs continuously and the most likely defective parts associated with this problem. Commonly replaced furnace parts: Wall Thermostat Control Board The information provided in this furnace troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York RepairClinic has millions of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment including washers, dryers, dishwashers, refrigerators, lawn mowers, snowblowers, furnaces, and air conditioners. We guarantee the fastest shipping possible—all in-stock parts ship the same business day. Return any part for any reason with our generous 365-day return policy. In addition to providing replacement parts, RepairClinic.com offers free online troubleshooting information and DIY repair videos. Use our website to choose from a series of problems to discover the likely causes and the correct replacement part(s) for your particular model. Once you’ve determined the solution, our expertly-produced video tutorials will guide you through every step of the repair. At RepairClinic, we make fixing things easy!

Furnace Blower Runs All The Time — Furnace Troubleshooting

Furnace blower not running? This video provides information on how to troubleshoot a furnace blower that won't run and the most likely defective parts associated with this problem. Commonly replaced furnace parts: Blower Motor Capacitor Control Board The information provided in this furnace troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York RepairClinic has millions of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment including washers, dryers, dishwashers, refrigerators, lawn mowers, snowblowers, furnaces, and air conditioners. We guarantee the fastest shipping possible—all in-stock parts ship the same business day. Return any part for any reason with our generous 365-day return policy. In addition to providing replacement parts, RepairClinic.com offers free online troubleshooting information and DIY repair videos. Use our website to choose from a series of problems to discover the likely causes and the correct replacement part(s) for your particular model. Once you’ve determined the solution, our expertly-produced video tutorials will guide you through every step of the repair. At RepairClinic, we make fixing things easy!

Furnace Blower Not Running — Furnace Troubleshooting

This video provides a reminder to viewers to replace their furnace filters. Don't forget to like and comment on this video and subscribe to our channel!

Replace Furnace Filters - Tech Tips from Repair Clinic

Gas furnace starts then stops? This video provides information on how to troubleshoot a furnace and the most likely defective parts associated with this problem. Commonly replaced furnace parts: Flame Sensor Pressure Switch Control Board Draft Inducer Motor The information provided in this furnace troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York RepairClinic has millions of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment including washers, dryers, dishwashers, refrigerators, lawn mowers, snowblowers, furnaces, and air conditioners. We guarantee the fastest shipping possible—all in-stock parts ship the same business day. Return any part for any reason with our generous 365-day return policy. In addition to providing replacement parts, RepairClinic.com offers free online troubleshooting information and DIY repair videos. Use our website to choose from a series of problems to discover the likely causes and the correct replacement part(s) for your particular model. Once you’ve determined the solution, our expertly-produced video tutorials will guide you through every step of the repair. At RepairClinic, we make fixing things easy!

Furnace Starts Then Stops — Furnace Troubleshooting

Furnace not heating? This video provides information on how to troubleshoot a furnace and the most likely defective parts associated with this problem. Commonly replaced furnace parts: Gas Valve Igniter Flame Sensor Draft Inducer Motor Flame Rollout Switch Control Board Pressure Switch The information provided in this furnace troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York RepairClinic has millions of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment including washers, dryers, dishwashers, refrigerators, lawn mowers, snowblowers, furnaces, and air conditioners. We guarantee the fastest shipping possible—all in-stock parts ship the same business day. Return any part for any reason with our generous 365-day return policy. In addition to providing replacement parts, RepairClinic.com offers free online troubleshooting information and DIY repair videos. Use our website to choose from a series of problems to discover the likely causes and the correct replacement part(s) for your particular model. Once you’ve determined the solution, our expertly-produced video tutorials will guide you through every step of the repair. At RepairClinic, we make fixing things easy!

Furnace Not Heating — Furnace Troubleshooting

Furnace blower noisy or loud? This video provides information on how to troubleshoot a furnace that's too loud and the most likely defective parts associated with this problem. Commonly replaced furnace parts: Blower Motor Blower Wheel Draft Inducer Motor The information provided in this furnace troubleshooting video is applicable to all brands: Air Bear Trion, Amana, Arcoaire, Broan, Bryant, Carrier, Coleman, Comfortmaker, DuroGuard, Fasco, Frigidaire, Garrison, Gibson, Goodman, Grandaire, Heil, Honeywell, ICM, ICP, Intertherm, Kelvinator, Kenmore, Lennox, Luxaire, Mammoth, Mars, Maytag, Medallion, Miller, Nordyne, Nutone, Payne, Philco, Rheem, Ruud, Tappan, Tempstar, Thermal Zone, Trane, WeatherKing, Westinghouse, White Rogers, York RepairClinic has millions of replacement parts for appliances, lawn equipment, power tools, and heating & cooling equipment including washers, dryers, dishwashers, refrigerators, lawn mowers, snowblowers, furnaces, and air conditioners. We guarantee the fastest shipping possible—all in-stock parts ship the same business day. Return any part for any reason with our generous 365-day return policy. In addition to providing replacement parts, RepairClinic.com offers free online troubleshooting information and DIY repair videos. Use our website to choose from a series of problems to discover the likely causes and the correct replacement part(s) for your particular model. Once you’ve determined the solution, our expertly-produced video tutorials will guide you through every step of the repair. At RepairClinic, we make fixing things easy!

Furnace Noisy Or Loud — Furnace Troubleshooting

This free troubleshooting video shows quick maintenance tips including cleaning the furnace, replacing the air filter, and cleaning the home venting to keeping your furnace working safely and efficiently. If you're unable to find the information you need on our website, we suggest that you use a search online to find a reliable online repair forum. It's likely that your question has already been answered there. We also recommend contacting your product's manufacturer or calling a local repair technician. And don't forget to like and comment on this video, and subscribe to our channel!

Furnace Maintenance Tips

This video provides step-by-step instructions for replacing the universal blower motor on Payne furnaces. The most common reasons for replacing the blower motor are when the furnace is loud or the blower motor does not run, but other more common problems have already been checked. All of the information in this blower motor replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, pliers, adjustable wrench, 3/8 inch socket, measuring tape, 7/16 inch socket, zip tie

Payne Furnace Replace Universal Blower Motor #10587

This video provides step-by-step instructions for replacing the blower motor on Payne furnaces. The most common reasons for replacing the blower motor are when the furnace is loud or the blower motor does not run, but other more common problems have already been checked. All of the information in this blower motor replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, pliers, adjustable wrench, 3/8 inch socket, measuring tape, 7/16 inch socket, zip tie

Payne Furnace Blower Motor Replacement #HC43AE134

This video provides step-by-step instructions for replacing the limit switch on Payne furnaces. The most common reason for replacing the limit switch is the furnace cycling on and off repeatedly. All of the information in this limit switch replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, 1/4 inch socket

Payne Furnace Limit Switch Replacement #HH680351

This video provides step-by-step instructions for replacing the gas valve on Payne furnaces. The most common reason for replacing the gas valve is the furnace burners not lighting. All of the information in this blower motor replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, pipe wrenches, 1/4 inch socket

Payne Furnace Gas Valve Replacement #EF32CB192

Repairing a Payne gas furnace? This video demonstrates the proper and safe way to disassemble a furnace and how to access parts that may need to be tested and/or replaced. Here is a list of the most common furnace problems: Furnace does not heat Furnace is loud Furnace only runs for a few minutes Furnace blower does not run Furnace blower runs all the time Tools needed: flat head screwdriver, pipe wrenches, quarter inch socket, pliers, adjustable wrench, 7/16 inch wrench, tape measure, zip ties

Payne Gas Furnace Disassembly (#PG9YAB048080), Repair Help

This video provides step-by-step instructions for replacing the draft inducer motor on Payne furnaces. The most common reasons for replacing the inducer motor is the furnace coming on and turning off repeatedly without starting to heat. All of the information in this draft inducer motor replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, pliers, adjustable wrench, 3/8 inch socket, measuring tape, 7/16 inch socket, zip tie

Payne Furnace Draft Inducer Motor #333710-751

This video provides step-by-step instructions for replacing the flame sensor on Payne furnaces. The most common reason for replacing the flame sensor is the furnace fan cycling on and off but never lighting. All of the information in this flame sensor replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, 1/4 inch socket

Payne Furnace Flame Sensor Replacement #LH33WZ520

This video provides step-by-step instructions for replacing the igniter on Payne furnaces. The most common reason for replacing the igniter is the fan running but the burners never lighting. All of the information in this igniter replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, 1/4 inch socket

Payne Furnace Igniter Replacement #LH33ZG002

This video provides step-by-step instructions for replacing the flame rollout switch on Payne furnaces. The most common reason for replacing the rollout switch is the burners igniting and then shutting off repeatedly. All of the information in this flame rollout switch replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, quarter inch socket

Payne Furnace Flame Rollout Switch Replacement #HH680348

This video provides step-by-step instructions for replacing the drain trap on Payne furnaces. The most common reasons for replacing the drain trap is if the furnace is leaking water. All of the information in this drain trap replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, pliers

Payne Furnace Drain Trap Replacement #328060-701

This video provides step-by-step repair instructions for replacing the run capacitor on a Payne furnace. The most common reason for replacing the run capacitor is when the furnace fan isn’t working. All of the information for this run capacitor replacement video is applicable to the following brands: Payne

Payne Furnace Run Capacitor Replacement #P291-1003

This video provides step-by-step instructions for replacing the transformer on Payne furnaces. The most common reason for replacing the transformer is the furnace not running at all. All of the information in this transformer replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, 1/4 inch socket

Payne Furnace Transformer Replacement #HT01BC117

This video provides step-by-step instructions for replacing the pressure switch assembly on Payne furnaces. The most common reason for replacing the pressure switch is the induction fan running but the burners never lighting. All of the information in this pressure switch replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver

Payne Furnace Pressure Switch Assembly #HK06NA016

This video provides step-by-step instructions for replacing the blower wheel on Payne furnaces. The most common reasons for replacing the blower wheel are when the furnace is loud or the blower motor does not run. All of the information in this blower wheel replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver, pliers, adjustable wrench, 3/8 inch socket, measuring tape, 7/16 inch socket, zip tie

Loud PayneFurnace? Blower Wheel Replacement #LA680593

This video provides step-by-step instructions for replacing the door switch on Payne furnaces. The most common reason for replacing the door switch is the furnace not operating at all. All of the information in this door switch replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver

Payne Furnace Door Switch Replacement #HR54ZA006

This video provides step-by-step instructions for replacing the sight glass on Payne furnaces. All of the information in this sight glass replacement video is applicable to the following brands: Payne Tools used: flat head screwdriver

HK42FZ018 Furnace Control Board

This part HK42FZ018 is compatible with:

Related Articles & Videos

Control Board Customer Reviews

Common Problems Fixed by the Control Board