Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpRCA Washer RepairRCA Washer filling when not in use Repair
RCA Washer filling when not in use
When your RCA washer is filling with water when off, water in the washing machine drum when not in use usually points to a problem with the water inlet valve. The valve should close when the washer loses power, but a defective valve can allow water to seep into the tub, causing your washing machine to keep filling with water when off. Before replacing it, check the home water pressure because low pressure can prevent the valve from closing fully. A clogged whole-house filter may reduce pressure, and low pressure at multiple faucets may require help from your local water supplier. If pressure is adequate, inspect and clean the filter screens in the water inlet valve and fill hoses. Mineral deposits or debris can keep the screens clogged and interfere with valve operation. Unplug the washer, shut off both water supply valves, place a bucket beneath the hoses, and remove the hoses to check the screens. If cleaning does not solve the problem, replace the water inlet valve. Enter your RCA washer model number to find the exact replacement part for your specific washing machine.
01 - RCA Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my RCA washer filling with water when it is turned off?
How do I know if my RCA washing machine water inlet valve is bad?
Can low water pressure cause a washer to keep filling when it is off?
How do I clean clogged fill hose or water inlet valve screens?
How can I find the correct RCA washer water inlet valve replacement?