Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpHotpoint Washer RepairHotpoint Washer filling when not in use Repair

Hotpoint Washer filling when not in use

If you find water in your washing machine drum when not in use, the water inlet valve is the most likely cause. This valve should close when the washer is turned off, but a defective valve can allow water to continue entering the tub, causing a washer filling with water when off or a washing machine filling with water when off. Check the household water pressure first, since the valve needs at least 20 psi to operate and shut off correctly. Low pressure can prevent the valve from closing fully, especially if a whole-house filter is clogged. If pressure is adequate, inspect and clean the filter screens in the fill hoses and water inlet valve. Sediment or debris can restrict water flow or keep the valve from sealing. Unplug the Hotpoint washer and shut off both water supply valves before removing the hoses, and use a bucket to catch remaining water. If cleaning the screens and checking pressure does not stop the problem, replace the Hotpoint washing machine water inlet valve. Enter your model number to find the exact replacement part for your specific washing machine.

01 - Hotpoint Washing Machine Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all Hotpoint Washing Machine Water Inlet Valve Parts
Top Solution

02 - Low Water Pressure from House Supply

The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely

03 - Clogged Screens in Fill Hose or Water Inlet Valve

All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common

Frequently Asked Questions

Why is my Hotpoint washing machine filling with water when it is off?
How do I know if the water inlet valve is causing my washer to fill when not in use?
Can low water pressure make a washing machine keep filling when it is off?
How do I clean clogged fill hose or water inlet valve screens?
How do I find the correct Hotpoint water inlet valve for my washer?