When your Tappan washer is filling with water when off, water in the washing machine drum when not in use usually points to a problem with the water inlet valve. This valve should close when the washer loses power, but a defective valve can allow water to continue entering. Check that household water pressure is at least 20 psi, since low pressure can prevent the valve from shutting off completely. A clogged whole-house filter may reduce pressure, so check whether water flow is weak at other faucets. If pressure is adequate, replace the water inlet valve. Clogged screens in the fill hoses or valve are another common cause of a washer filling with water when off. Unplug the machine, shut off both water supplies, remove the hoses, and clean debris from the filter screens. Always turn off the water until the problem is corrected to prevent overflow. Enter your Tappan washer's model number to find the exact replacement water inlet valve or other part for your specific washing machine.
01 - Tappan Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my Tappan washer filling with water when it's off?
How can I tell if the water inlet valve is causing my washer to fill when not in use?
Can low water pressure make a washing machine fill when it's not running?
How do I clean the screens when my washer keeps filling with water?
How do I find the correct Tappan water inlet valve for my washer?