Kelvinator Washer filling when not in use

If you find water in the washing machine drum when not in use, your Kelvinator washer may be filling with water when off because the water inlet valve is not closing properly. First, check the household water pressure. The inlet valve needs at least 20 psi to operate and shut off correctly, and low pressure from a clogged whole-house filter or supply problem can allow water to leak into the washer after the cycle ends. If pressure is adequate, the water inlet valve is the most likely failed part and should be replaced. Clogged screens in the fill hoses or water inlet valve can also restrict flow or prevent the valve from closing, so unplug the machine, shut off both water supplies, remove the hoses, and clean the screens while catching residual water in a bucket. These are the main reasons a washing machine fills with water when off or a washer keeps filling with water. Enter your Kelvinator washer's model number to find the exact replacement water inlet valve or other part made to fit your specific machine.

01 - Kelvinator Washing Machine Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.

Enter model number to search for the required part specific to your product

Need help finding your model number?

Shop all Kelvinator Washing Machine Water Inlet Valve Parts

02 - Low Water Pressure from House Supply

The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.

Highly Likely

03 - Clogged Screens in Fill Hose or Water Inlet Valve

All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.

Common