Choose Product
Identify Problem
03
Find Solutions

Gibson Washer filling when not in use

If you find water in the washing machine drum when not in use, the water inlet valve is the most likely cause. This valve controls the flow of hot and cold water into your Gibson washer, and a defective valve may fail to close completely, allowing the washer to keep filling with water when off. First, confirm that your household water pressure is adequate, since low pressure can prevent the valve from shutting properly. A clogged whole-house filter may contribute to low pressure. If the pressure is normal, replace the water inlet valve. Next, check for clogged screens in the fill hoses or water inlet valve. Unplug the washer, shut off both water supply valves, place a bucket under the hoses, and clean away any debris from the screens. These checks can help diagnose why your washing machine is filling with water when off and prevent further leaking. Enter your Gibson washer’s model number to find the exact replacement water inlet valve or other part that fits your specific washing machine.

01 - Gibson Washing Machine Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution

02 - Low Water Pressure from House Supply

The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely

03 - Clogged Screens in Fill Hose or Water Inlet Valve

All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common

Frequently Asked Questions

Why is my Gibson washer filling with water when it is off?
How do I stop my washing machine from filling when not in use?
Can low water pressure cause a washer to keep filling with water?
How can I tell whether the water inlet valve or fill hose is causing the problem?
How do I find the correct Gibson washer water inlet valve?

Shop by Gibson Washing Machine Parts