Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpInglis Washer RepairInglis Washer filling when not in use Repair
Inglis Washer filling when not in use
When your Inglis washer is filling with water when off, water may slowly enter the tub even when the machine is not running. The most likely cause is a defective water inlet valve that cannot close completely. Check your home water pressure first, since the valve needs adequate pressure to shut off properly. Low pressure from a clogged whole-house filter or a supply problem can leave the valve partially open, causing a washer to keep filling with water. If the pressure is normal, inspect the filter screens in the water inlet valve and fill hoses. Debris can restrict water flow or prevent the valve from sealing, leading to water in the washing machine drum when not in use. Unplug the washer, close both water supply valves, place a bucket beneath the hoses, and clean the screens before reconnecting them. If the problem continues, replace the water inlet valve. Enter your Inglis washer model number to find the exact replacement part for your specific washing machine.
01 - Inglis Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my Inglis washer filling with water when it is turned off?
Can low water pressure cause an Inglis washing machine to fill when not in use?
How do I check the water inlet valve on an Inglis washer?
What should I do if my Inglis washer keeps filling after I clean the hose screens?
How do I find the correct water inlet valve for my Inglis washer?