Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpE-Wave Washer RepairE-Wave Washer filling when not in use Repair
E-Wave Washer filling when not in use
When your E-Wave washer is filling with water when off, or you find water in the washing machine drum when not in use, the water inlet valve is the most likely cause. This valve should close when the washer is not running, but a defective E-Wave washing machine water inlet valve can allow water to keep entering the tub. The valve needs at least 20 psi of water pressure to operate and shut off correctly, so low household water pressure is the next likely cause. Check whether water pressure is low at other faucets, and replace a clogged whole-house filter if needed. Clogged screens in the fill hoses or water inlet valve can also prevent the valve from closing. Unplug the washer, shut off both water supply valves, remove the hoses, and clean any debris from the screens. If the washer keeps filling with water after these checks, replace the water inlet valve. Enter your model number to find the exact replacement part for your specific washing machine, then shop E-Wave washer parts that fit your model.
01 - E-Wave Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my E-Wave washer filling with water when it is off?
How do I know if the water inlet valve is causing the washer to fill when not in use?
Can low water pressure make a washing machine fill when it is not running?
How do I clean clogged washer fill hose or water inlet valve screens?
How do I find the correct E-Wave water inlet valve for my washer?