Choose Product
Identify Problem
03
Find Solutions

Universal Washer filling when not in use

If you find water in the washing machine drum when not in use, the water inlet valve is the most likely cause. This valve should close when the washer is off, but a defective valve can allow water to continue entering the tub, causing a washer to keep filling with water or a washing machine to fill with water when off. First, confirm that household water pressure is at least 20 psi. Low water pressure can prevent the inlet valve from shutting completely, especially if a whole-house filter is clogged or other faucets also have weak pressure. If pressure is adequate, replace the water inlet valve. Clogged screens in the fill hoses or inlet valve are another common cause. Unplug the Universal washing machine, shut off both water supply valves, disconnect the hoses, and clean debris from the filter screens. If your washer is filling when not in use, these checks can identify the problem without replacing unrelated parts. Enter your model number to find the exact water inlet valve or other replacement part for your specific washing machine.

01 - Universal Washing Machine Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution

02 - Low Water Pressure from House Supply

The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely

03 - Clogged Screens in Fill Hose or Water Inlet Valve

All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common

Frequently Asked Questions

Why is my washing machine filling with water when it is off?
Can low water pressure make a washer fill when it is not in use?
How do I check the water inlet valve on a washer that keeps filling?
How do I clean clogged washer fill hose or water inlet valve screens?
How do I find the correct water inlet valve for my washing machine?

Shop by Universal Washing Machine Parts