Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpMontgomery Wards Washer RepairMontgomery Wards Washer filling when not in use Repair
Montgomery Wards Washer filling when not in use
If your Montgomery Wards washer is filling with water when off, the water inlet valve is the most likely cause. This valve opens to let water into the machine and should close completely when the cycle ends. If it is defective, your washing machine may keep filling with water when off, even after the power is disconnected. Check household water pressure first, since the valve needs at least 20 psi to operate and shut off correctly. Low water pressure can prevent the valve from closing, especially if a whole-house filter is clogged or other faucets have weak flow. If pressure is adequate, inspect the filter screens in the water inlet valve and fill hoses for debris. Unplug the washer, turn off both water supply valves, remove the hoses, and clean the screens over a bucket. Replace the water inlet valve if it still allows water into the tub. Enter your model number to find the exact replacement part for your specific Montgomery Wards washing machine.
01 - Montgomery Wards Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my washing machine filling with water when it is off?
Can low water pressure cause a washer to keep filling when not in use?
How do I clean the screens on a washer water inlet valve?
How can I test the water inlet valve on my Montgomery Wards washer?
How do I find the correct water inlet valve for my Montgomery Wards washer?
Shop by Popular Montgomery Wards Washing Machine Models
Montgomery Wards FFT6289-80A Washing Machine PartsMontgomery Wards FFT6389-80A Washing Machine PartsMontgomery Wards FFT6502A80 Washing Machine PartsMontgomery Wards FFT6502A87 Washing Machine PartsMontgomery Wards FFT658980 Washing Machine PartsMontgomery Wards FFT658987 Washing Machine Parts