Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpJC Penney Washer RepairJC Penney Washer filling when not in use Repair
JC Penney Washer filling when not in use
If your JC Penney washer is filling with water when off, a defective water inlet valve is the most likely cause. The valve should shut completely when the cycle ends, but a worn valve can allow water to seep into the tub, leaving water in the washing machine drum when not in use. Before replacing it, check the household water pressure. The water inlet valve needs at least 20 psi to close properly, and low pressure from a clogged whole-house filter or supply problem can cause a washer filling with water when off. If pressure is adequate, inspect the screens in the fill hoses and water inlet valve. Sediment or debris can restrict flow or prevent the valve from closing. Unplug the washer, shut off both water supplies, disconnect the hoses, and clean the screens over a bucket. If your washer keeps filling with water after these checks, replace the water inlet valve. Enter your model number to find the exact replacement part for your specific JC Penney washing machine.
01 - JC Penney Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my JC Penney washer filling with water when it is turned off?
How do I know if the water inlet valve is causing my washer to fill when not in use?
Can low water pressure make a washing machine fill with water when it is off?
How do I clean clogged fill hose or water inlet valve screens?
How can I find the correct JC Penney water inlet valve for my washer?