Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpBosch Washer RepairBosch Washer filling when not in use Repair
Bosch Washer filling when not in use
If your Bosch washer is filling with water when off, or you find water in the washing machine drum when not in use, the water inlet valve is the most likely cause. This valve should close completely when the washer loses power, but a defective valve can allow water to seep into the tub. Before replacing it, check your home's water pressure because low pressure can prevent the valve from shutting off properly. A clogged whole-house filter may also restrict pressure. If water pressure is adequate, inspect the screens in the water inlet valve and fill hoses for sediment or debris. Unplug the washing machine, shut off both water supply valves, place a bucket under the hoses, and clean the screens as needed. If the washer keeps filling with water when off after these checks, replace the Bosch water inlet valve. Enter your model number to find the exact replacement part for your specific washing machine. Repair Clinic carries Bosch water inlet valves and other washer parts matched to your model, helping you make the repair safely and correctly.
01 - Bosch Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my Bosch washing machine filling with water when it's off?
How do I know if my Bosch washer water inlet valve is bad?
Can low water pressure cause a washing machine to fill when not in use?
How do I clean clogged screens when my washer keeps filling with water?
How do I find the correct Bosch water inlet valve for my washer?