Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpEstate Washer RepairEstate Washer filling when not in use Repair

Estate Washer filling when not in use

When your Estate washer is filling with water when off, water in the washing machine drum when not in use usually points to a problem with the water inlet valve. This valve should close completely when the washer is not running, but a defective valve can allow water to seep into the tub. Check the household water pressure first, since low pressure can prevent the valve from shutting off properly. A clogged whole-house filter may also reduce pressure. If the pressure is adequate, replace the water inlet valve. Next, inspect and clean the filter screens in the fill hoses and water inlet valve. Debris can restrict water flow or keep the valve from closing, causing the washer to keep filling with water. Unplug the Estate washing machine, shut off both water supply valves, and use a bucket to catch any water left in the hoses before removing and cleaning the screens. If your washer is filling with water when not in use or you are asking why your washing machine is filling with water when off, enter your model number to find the exact replacement part for your specific machine.

01 - Estate Washing Machine Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Need help finding your model number?
Shop all Estate Washing Machine Water Inlet Valve Parts
Top Solution

02 - Low Water Pressure from House Supply

The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely

03 - Clogged Screens in Fill Hose or Water Inlet Valve

All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common

Frequently Asked Questions

Why is my Estate washing machine filling with water when it is off?
How do I know if the water inlet valve is causing my washer to fill when not in use?
Can low water pressure make a washing machine keep filling when it is not running?
How do I clean clogged screens when my washer is filling by itself?
How do I find the correct Estate water inlet valve for my washing machine?