Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpKitchenAid Washer RepairKitchenAid Washer filling when not in use Repair
KitchenAid Washer filling when not in use
When your KitchenAid washer is filling with water when off, the water inlet valve is the most likely cause. This valve opens to let water into the tub and should close completely when the cycle ends. If it is defective, the washing machine may keep filling with water or have water in the washing machine drum when not in use. Before replacing it, confirm the home water pressure is adequate. The valve needs at least 20 psi to operate and shut off properly, and low pressure from a clogged whole-house filter or supply problem can allow water to continue leaking into the washer after power is turned off. If pressure is normal, inspect and clean the filter screens in the fill hoses and water inlet valve. Unplug the washer, shut off both water supplies, place a bucket under the hoses, and remove any debris from the screens. If cleaning does not correct the problem, replace the water inlet valve. Enter your model number to find the exact replacement part for your specific KitchenAid washing machine.
01 - KitchenAid Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my KitchenAid washer filling with water when it's off?
Can low water pressure cause a washing machine to fill when it's not running?
How do I clean the screens if my washer keeps filling with water?
How can I test the water inlet valve on a KitchenAid washer?
How do I find the correct KitchenAid water inlet valve replacement part?