Unlock the Right Part
for Your Repair
Find the exact part you need
Enter your model number to see parts that fit your machine.
Choose Product
Identify Problem
03
Find Solutions
HomeRepair HelpMagic Chef Washer RepairMagic Chef Washer filling when not in use Repair
Magic Chef Washer filling when not in use
Is your Magic Chef washer filling with water when not in use? The most likely cause is a defective water inlet valve. The valve should shut off completely when the washer is powered down, but a worn valve can allow water to seep into the tub. Before replacing it, check that household water pressure is at least 20 psi, since low water pressure can prevent the valve from closing properly. A clogged whole-house filter may also restrict pressure. Next, inspect and clean the filter screens in the fill hoses and water inlet valve. Debris can block the screens or keep the valve from sealing. Unplug the washing machine, close both water supply valves, place a bucket beneath the hoses, and remove the hoses to check for buildup. This troubleshooting applies if your washer keeps filling with water, your washing machine is filling with water when off, or you find water in the washing machine drum when not in use. Enter your model number to find the exact replacement water inlet valve or other compatible Magic Chef washing machine part for your specific appliance.
01 - Magic Chef Washing Machine Water Inlet Valve
The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution
02 - Low Water Pressure from House Supply
The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely
03 - Clogged Screens in Fill Hose or Water Inlet Valve
All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common
Frequently Asked Questions
Why is my Magic Chef washing machine filling with water when it is off?
Can low water pressure cause a washer to keep filling when it is not in use?
How do I clean clogged fill hose or water inlet valve screens?
How can I test a Magic Chef washer water inlet valve before replacing it?
How do I find the correct water inlet valve for my Magic Chef washer?