Choose Product
Identify Problem
03
Find Solutions

Electrolux Washer filling when not in use

If your Electrolux washer is filling with water when off, or you find water in the washing machine drum when not in use, the water inlet valve is the most likely cause. This valve should close completely when the washer is not running, but a defective valve can allow water to seep into the tub. Confirm that household water pressure is at least 20 psi, then replace the water inlet valve if pressure is adequate. Low water pressure is the next likely cause. Insufficient pressure can prevent the valve from shutting off fully, especially if a whole-house filter is clogged or water pressure is low at other faucets. Clogged screens in the fill hoses or water inlet valve are also common. Unplug the washer, shut off the hot and cold water supplies, remove the hoses, and clean debris from the screens before testing the machine again. If the problem continues, inspect the valve and its wire harness for damage. Enter your Electrolux washer model number to find the exact replacement water inlet valve or other compatible part for your specific washing machine.

01 - Electrolux Washing Machine Water Inlet Valve

The water inlet valve opens to allow water to enter the washing machine. If the water inlet valve is defective, the wash may fill slowly or not fill at all. The water inlet valve requires at least 20 psi to function properly. First, check the water pressure to determine that it is adequate. If the water pressure is adequate, replace the water inlet valve.
Enter model number to search for the required part specific to your product
Top Solution

02 - Low Water Pressure from House Supply

The water inlet valve requires good water pressure to shut off properly. If the home's water pressure is too low, the valve may not close fully after the power is shut off causing water to leak into the washer when not in use. If you have a whole house filter it may be clogged and the filter needs to be replaced. If the water pressure is low at all the faucets, you may need to call your local water supplier to determine if the water pressure is sufficient.
Highly Likely

03 - Clogged Screens in Fill Hose or Water Inlet Valve

All water valves have filter screens to prevent particles from clogging the valve or stop the valve from closing. For added protection and easier access, some fill hoses may have screens added to the hose washers/gaskets where the fill hose connects to the homes hot or cold shut-off valve. The screens in the water valve and hoses should be checked and cleaned if necessary. Unplug the machine. Turn off the water supply valves. Get a bucket to catch the remaining water in the hoses. Unthread the hoses from your machine and clean any debris from the filter screens.
Common

Frequently Asked Questions

Why is my Electrolux washer filling with water when it is off?
Can low water pressure cause my washing machine to fill when not in use?
How do I check the water inlet valve on an Electrolux washer?
How do I clean the screens if my washer keeps filling with water?
How can I find the correct Electrolux water inlet valve or other replacement part?

Shop by Electrolux Washing Machine Parts