Choose Product
Identify Problem
03
Find Solutions

Universal Washer won't start

When your washer won't start, first confirm both hot and cold water supply valves are fully open. A washing machine may not begin the cycle if it cannot fill. Next, check the user control and display board, especially if the washer has power but won't start, some buttons do not respond, or the display is blank. If the board has power but remains unresponsive, it may need replacement. A faulty timer is another possible cause, but test it for continuity with a multimeter and check the more common problems first. Make sure the door or lid is completely closed, since the washer will not run when the door or lid is open. Finally, test the line fuse for continuity. If it has blown, inspect the wiring, motor, or drain pump for a short or other condition that caused the fuse to fail before installing a replacement. These steps apply to Universal washing machine models and can help diagnose a washer not starting or a washing machine that won't turn on. Enter your model number to find the exact replacement user interface board, timer, line fuse, or other part for your specific washing machine.

01 - Water Supply Valves are Closed

Confirm that both the hot and cold water supply valves are open. If the valves are closed the washer won't fill to start the wash cycle.
Top Solution

02 - Universal Washing Machine User Control and Display Board

To determine if the user control and display board is defective, try pressing the buttons on the control panel. If some of the buttons work, but others do not work, the control and display board might need to be replaced. Additionally, if the display is not working, check the power to the user control and display board. If the user control and display board has power, but it isn’t working, replace it.
Enter model number to search for the required part specific to your product
Top Solution

03 - Universal Washing Machine Timer

The timer is frequently misdiagnosed—before replacing the timer, first check all of the more commonly defective parts. To determine if the timer is defective, consult your washer’s wiring diagram and use a multimeter to test the timer for continuity.
Top Solution

04 - Door or lid is open

Make sure the door or lid is closed. Most machines will not run with the door or lid open.
Top Solution

05 - Door is Open

Make sure the door is closed. The washer will not run with the door open. 
Top Solution

06 - Universal Washing Machine Line Fuse

The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely

07 - Universal Washing Machine Thermal Fuse

If the washer overheats, the thermal fuse will blow. If the line fuse blows, the washer won’t start. To determine if the thermal fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. If you don’t resolve the underlying issue, the new fuse will blow too.
Highly Likely

Frequently Asked Questions

Why won't my washer start even though it has power?
Can closed water valves keep a washing machine from starting?
What should I check if my washer door or lid won't let the machine start?
How do I test a washer line fuse or timer when the washer won't start?
How can I find the correct replacement part for my washer?

Shop by Universal Washing Machine Parts